Goodman 2 Ton R32 Multi-Position ECM-Based Air Handler With Internal TXV (AMST24BU1300)
Check current price on AC Direct →
Key features
- ECM variable-speed blower motor reduces blower electricity use versus standard PSC motors
- Internal TXV factory-installed for more precise refrigerant metering at part-load conditions
- Multi-position cabinet installs upflow, downflow, or horizontal to fit varied duct layouts
- R-32 refrigerant compatibility, a lower-GWP alternative to R-410A
- 2-ton (24,000 BTU nominal) capacity suits homes roughly 900 to 1,400 square feet depending on climate and insulation
- Cased coil design simplifies field connections and reduces leak points at the coil cabinet
About this system
The Goodman AMST24BU1300 is a 2-ton, multi-position air handler built around an ECM (electronically commutated motor) blower and an internally mounted TXV (thermostatic expansion valve). The ECM motor runs at variable speeds to match system demand more precisely than a standard PSC motor, which trims electricity use at the air-handler stage and helps maintain steadier indoor humidity levels. The internal TXV meters refrigerant flow more accurately than a fixed orifice, improving part-load performance and protecting the compressor. Together, these two features let the AMST24BU1300 punch above the entry-level air-handler tier without stepping into the price range of premium brands.
R-32 refrigerant is a notable forward-looking choice here. R-32 has a global warming potential roughly two-thirds lower than R-410A, and it is increasingly common in new residential equipment as the industry moves away from higher-GWP refrigerants. Homeowners pairing this unit with a compatible R-32 outdoor condenser should confirm that their servicing technician is familiar with R-32 handling, since it requires slightly different procedures than R-410A. The multi-position design means the cabinet can be oriented upflow, downflow, or horizontal, which suits a wide range of install scenarios including attic, closet, basement, and crawl space applications.
This air handler is best understood as the indoor half of a split system; its efficiency rating depends entirely on which outdoor unit it is paired with and how the system is commissioned. Goodman prices this unit 15 to 25 percent below comparable Trane, Lennox, and Carrier air handlers, making it a realistic option for budget-conscious homeowners, rental property owners, or contractors building value-oriented systems. That savings comes with real trade-offs in long-term reliability expectations that buyers should weigh honestly before purchasing.
The AMST24BU1300 delivers genuinely useful features, including an ECM blower and internal TXV, at a price point well below premium competitors, making it a solid choice for buyers who prioritize upfront cost and have a reliable installer. Its long-term track record, like most Goodman equipment, is serviceable but below the reliability ceiling of Trane or Carrier, and owners should budget for potential coil or capacitor service calls after year 7. If keeping first cost down is the priority and the install is handled by a careful technician, this unit represents good value; if longevity and minimal service calls are the priority, the premium brands earn their higher prices.
Overall score is the average of the five ratings above.
What we like
- ECM blower motor improves humidity control and lowers blower electricity consumption versus PSC motors
- Factory-installed internal TXV eliminates a common field-installation variable and supports more stable system performance
- R-32 refrigerant is lower-GWP and positions the system for longer regulatory relevance than R-410A equipment
- Multi-position flexibility reduces installation labor cost and opens up a wider range of duct configurations
- Priced 15 to 25 percent below comparable Carrier, Trane, and Lennox air handlers, a real and meaningful savings
Trade-offs
- Evaporator coil leaks are a documented recurring issue in owner reviews and can be expensive to address outside of warranty
- Compressor (on the paired outdoor unit) averages 10 to 14 years versus 15 to 20 years for premium-brand counterparts
- R-32 requires technicians trained in its specific handling; not every local HVAC shop is fully up to speed yet
- Overall system performance is heavily dependent on install quality, meaning a poor installation can undercut the ECM and TXV advantages entirely
What homeowners and pros say about Goodman
Homeowners who share feedback on Goodman equipment tend to split into two fairly distinct camps. Those who had their system installed carefully by an experienced technician and kept up with maintenance often report years of trouble-free operation and consistently point to affordability as the reason they chose Goodman in the first place. That sentiment shows up in Google dealer review scores, which aggregate around 3.8 out of 5 across multiple locations, with low price being the most frequently mentioned positive. The other camp, more heavily represented on complaint-oriented channels like ConsumerAffairs where Goodman sits around 2.5 out of 5, describes repair costs that start climbing around year 7 or 8, often citing the same failure points repeatedly: dual-run capacitors going out (a relatively quick fix in the 300 to 600 dollar range but an annoyance), evaporator coil leaks that are considerably more expensive to address, and a compressor lifespan that tends to average 10 to 14 years rather than the 15 to 20 years owners of Trane or Carrier equipment more commonly report.
HVAC technicians who work on Goodman equipment regularly tend to hold a pragmatic view: the equipment is not bad, but it requires a clean installation to perform as intended, and it rewards owners who stay on top of annual maintenance. For an air handler specifically, the internal TXV on the AMST24BU1300 removes one common field-installation variable, which technicians generally view as a positive. The shift to R-32 is also drawing attention from pros who see it as a sensible direction, though a minority note that not every service tech in every market is fully comfortable with R-32 procedures yet. The honest summary from both groups is the same: Goodman delivers real value upfront, but it asks more of the installer and more of the owner over the long run than the premium brands do.
Sources: ConsumerAffairs Goodman owner reviews, AHRI Directory of Certified Product Performance, U.S. DOE appliance and equipment efficiency standards, Goodman product specification sheets.
How it compares
| Brand | Comparable model | SEER2 | Stage | Price position |
|---|---|---|---|---|
| Goodman | AMST24BU1300 | Dependent on matched outdoor unit | Multi-speed (ECM) | Value pick |
| Carrier | Fan Coil FB4C | Dependent on matched outdoor unit | Multi-speed | Roughly 20 to 30 percent more than the Goodman |
| Trane | Air Handler TAM7 | Dependent on matched outdoor unit | Variable-speed capable | Roughly 25 to 35 percent more than the Goodman |
| Lennox | Air Handler CBX25UH | Dependent on matched outdoor unit | Multi-speed (ECM) | Roughly 20 to 30 percent more than the Goodman |
Competitor rows are comparable single-stage units at similar efficiency; price is relative position, not a quote.
Questions about this system
Does the AMST24BU1300 work with R-410A outdoor units, or only R-32?
This air handler is designed and rated for use with R-32 refrigerant systems. Pairing it with an R-410A outdoor unit is not a supported configuration, and doing so would void the warranty and create potential safety issues. Confirm your outdoor unit is also R-32 compatible before purchasing.
What outdoor condensers are compatible with this air handler?
Goodman publishes an AHRI-certified match list for this model; you should pull that list and confirm the specific outdoor unit you are pairing it with to get a rated system efficiency number. Using a non-matched outdoor unit can reduce efficiency and affect warranty coverage.
How does the ECM motor actually help me as a homeowner?
An ECM motor adjusts its speed based on system demand rather than running at full speed constantly, which reduces electricity use at the blower stage and helps remove more humidity from indoor air during mild weather. It also tends to run more quietly at lower speeds compared to a single-speed PSC motor.
What is Goodman's warranty on this air handler, and what does it require?
Goodman typically offers a 10-year parts limited warranty on registered products, with registration required within a set window after installation. Warranty coverage generally requires installation by a licensed HVAC contractor; DIY installation typically voids it. Review the specific warranty document for this model, as terms can vary.
Are evaporator coil leaks something I should genuinely worry about with this unit?
Coil leaks are one of the documented recurring issues in Goodman owner reviews, though they are not universal. Proper installation and correct refrigerant charge at commissioning reduce the risk. If a leak does develop outside the warranty period, repair or coil replacement costs can be significant, so it is worth discussing a service agreement with your installer.
Specifications
| Cooling capacity | 2 Ton |
| Configuration | Multi-Position |
| Refrigerant | R-32 |
| Model | AMST24BU1300 |