GoodmanR-32

Goodman R32 60000 BTU 80% Multi-Speed ECM Gas Furnace Low Nox Upflow / Horizontal (GR9S800603AX)

60000 BTU • Upflow • Model GR9S800603AX
Goodman R32 60000 BTU 80% Multi-Speed ECM Gas Furnace Low Nox Upflow / Horizontal (GR9S800603AX)
Complete system
Complete system
✓ In stock, ships nationwide
Price
$1,238.00
Your total$1,238.00
Add to cart for an even lower price. Manufacturer pricing rules limit what we can show here, so your final discounted total appears in the AC Direct cart, with no obligation.

Check current price on AC Direct →

Free shippingTo your door
Price PromiseAC Direct
25 yearsHVAC expertise

Need it installed? We will connect you with a local HVAC contractor who can quote and install this system.Find a Contractor →

Key features

  • 60,000 BTU single-stage gas burner with 80% AFUE efficiency rating
  • Multi-speed ECM blower motor for reduced electrical consumption versus PSC motors
  • Upflow and horizontal installation configurations supported
  • Low NOx burner design meets California and regional air quality regulations
  • Compatible with R-32 refrigerant systems in matched coil applications
  • Durable aluminized-steel heat exchanger with limited lifetime warranty coverage

About this system

The Goodman GR9S800603AX is a 60,000 BTU, 80% AFUE upflow/horizontal gas furnace built around an ECM (electronically commutated motor) blower and a multi-speed design. The 80% AFUE rating means roughly 80 cents of every fuel dollar goes toward heating your home, with the remaining 20% lost through the flue. That efficiency tier is appropriate for mild to moderate climates or installations where running a second flue pipe for a 90%+ condensing unit is not practical or cost-effective. The ECM blower is a genuine advantage at this price point, offering lower electrical draw and quieter operation compared to older PSC motors, which translates to modest but real savings on your electricity bill over time.

The model designation indicates a single-stage gas valve paired with the multi-speed blower, so the burner is either fully on or fully off. That is a straightforward design that most technicians know well, which can reduce diagnostic time and service costs. The upflow/horizontal configuration gives installers flexibility for attic, closet, or basement installations. The Low NOx designation meets stricter California and regional air quality standards, which is important if you are in a covered district. At 60,000 BTU, this unit suits homes in the 1,200 to 1,800 square foot range in moderate climates, though proper Manual J load calculation by your installer should always determine the right size.

The HVAC.best Review
Reviewed by Dave Watson, HVAC.best
Score 3.3/5

The GR9S800603AX delivers a competent, code-compliant 80% AFUE furnace at a price point that undercuts comparable Trane, Carrier, and Lennox models by a meaningful margin. The ECM motor and Low NOx compliance are genuine value-adds, but buyers should budget for potential component replacements after year seven and understand that long-term performance depends heavily on installation quality. It is a reasonable choice for cost-conscious buyers who are not planning to stay in their home for 20-plus years.

Efficiency3.0
Value4.0
Reliability2.5
Warranty3.5
Install-friendliness3.5

Overall score is the average of the five ratings above.

What we like

  • Priced roughly 15 to 25 percent below comparable Trane, Lennox, and Carrier models for the same efficiency tier
  • ECM blower motor reduces electrical consumption and operates more quietly than standard PSC motors
  • Multi-speed operation provides better comfort and more even heat distribution than single-speed alternatives
  • Low NOx certification satisfies California SCAQMD and similar regional air quality requirements
  • Upflow/horizontal flexibility suits a wide range of installation locations

Trade-offs

  • 80% AFUE trails 90%+ condensing furnaces in fuel efficiency, adding up in colder climates over time
  • Single-stage burner delivers less precise temperature control than two-stage or modulating furnaces
  • Goodman's ConsumerAffairs score sits around 2.5 out of 5, with repair costs rising notably after year seven being a recurring concern
  • Long-term reliability depends significantly on installer quality, and Goodman's compressor lifespan on paired cooling equipment averages shorter than premium competitors
Best for: Homeowners in mild to moderate climates who want a code-compliant, Low NOx furnace with an ECM motor at a below-market price and plan to sell or renovate within 10 to 12 years. Look elsewhere if If you heat a large home in a cold climate, plan to stay long-term, or want the peace of mind of a premium brand's service network and longer compressor track record, consider stepping up to a Trane S8X2 or Carrier 59SC5.

What homeowners and pros say about Goodman

Homeowners who post about Goodman furnaces tend to split into two camps: those who had a smooth installation and years of quiet, uneventful service, and those who faced repeated service calls starting around year seven or eight. On ConsumerAffairs, Goodman scores approximately 2.5 out of 5, and the pattern in the negative reviews is consistent: the units work adequately early on, then repair costs begin accumulating. Google dealer reviews tell a more balanced story, averaging around 3.8 out of 5, where the most common praise is straightforward affordability and the most common criticism relates to responsiveness when something goes wrong. Both sets of reviews are worth reading with the understanding that satisfied owners rarely write reviews at all, which skews complaint-heavy channels like ConsumerAffairs downward.

HVAC technicians who service Goodman equipment regularly point to dual-run capacitor failures as the most predictable maintenance item, a repair that typically runs 300 to 600 dollars and is not unique to Goodman. More concerning to some pros is the documented history of evaporator coil leaks appearing in owner reviews and, in a smaller number of cases, refrigerant leaks within the first year that usually trace back to installation or charge issues rather than manufacturing defects. On paired cooling systems, Goodman compressors average a 10 to 14 year lifespan versus 15 to 20 years for premium competitors, a real consideration for buyers who want to avoid a full system replacement before the 15-year mark. For this furnace specifically, the ECM blower and Low NOx compliance are genuine strengths at the price, and a careful installation by an experienced contractor remains the single most important factor in how this unit performs long-term.

Sources: ConsumerAffairs Goodman owner reviews, AHRI Directory of Certified Product Performance, U.S. DOE appliance and equipment efficiency standards, Goodman product specification sheets.

How it compares

Brand Comparable model SEER2 Stage Price position
Goodman GR9S800603AX N/A (furnace only) Single-stage Value pick
Carrier Performance 59SC5 (80% AFUE) N/A (furnace only) Two-stage Noticeably higher than Goodman; mid-premium tier
Trane S8X2 (80% AFUE) N/A (furnace only) Two-stage Higher than Goodman; mid-premium tier
Lennox Merit ML180 (80% AFUE) N/A (furnace only) Single-stage Moderately higher than Goodman; entry-to-mid premium tier

Competitor rows are comparable single-stage units at similar efficiency; price is relative position, not a quote.

Questions about this system

Does the Low NOx rating mean this furnace can be installed in California's SCAQMD air quality management district?

Yes, the Low NOx designation is specifically designed to meet SCAQMD and similar regional standards that restrict nitrogen oxide emissions from residential gas appliances. Always confirm your local district's current requirements with your installer before purchase, as rules can tighten over time.

What does multi-speed ECM actually mean for my comfort and utility bills?

The ECM blower adjusts its speed to match airflow demands, running slower during mild conditions and faster when the system needs to move more air. Compared to a fixed-speed PSC motor, it uses significantly less electricity at lower speeds and produces less noise. It does not change the fact that the gas burner itself is single-stage, so heat output is still either fully on or fully off.

What are the most likely repair costs I should plan for over the first 10 years?

Dual-run capacitors are the most commonly reported failure on Goodman equipment and typically run 300 to 600 dollars including labor. Igniter and pressure switch replacements are also routine and relatively affordable. Goodman owners on review platforms note that repair frequency and costs tend to climb after roughly year seven, so setting aside a small annual service budget is prudent.

Can this furnace be paired with any air conditioning coil, or does it need a specific Goodman coil?

For an efficient and warranty-valid system, Goodman recommends pairing this furnace with a matched Goodman or Amana evaporator coil. Using a mismatched coil may affect efficiency ratings and could complicate warranty claims. Your installer should pull the correct coil from Goodman's matched-system documentation for your refrigerant type and tonnage.

Is 80% AFUE good enough for my climate, or should I pay more for a 96% condensing furnace?

In mild to moderate climates, the additional cost of a 90%+ condensing furnace can take many years to recover in fuel savings, making 80% a reasonable economic choice. In colder climates where the furnace runs heavily for five or more months a year, the fuel savings from a condensing unit typically justify the higher upfront cost within five to eight years. A qualified HVAC contractor can run a payback analysis based on your local gas rates and heating degree days.

Specifications

Furnace output 60000 BTU
Configuration Upflow
Refrigerant R-32
Model GR9S800603AX
Image, specs, price and configurable options read from the AC Direct product page