Goodman 2.5 Ton AC And 60000 BTU 80% AFUE Gas Furnace System | 15.2 SEER2 AC | Multi-Speed ECM Low NOx Furnace | Horizontal | R32
Check current price on AC Direct →
Key features
- 2.5-ton cooling capacity with 15.2 SEER2 efficiency rating
- 60,000 BTU 80% AFUE gas furnace with multi-speed ECM blower motor
- Horizontal configuration for attic, crawlspace, or side-discharge installs
- R-32 refrigerant with lower global warming potential than R-410A
- Multi-speed ECM motor improves airflow consistency and reduces blower energy use
- Standard B-vent exhaust eliminates need for PVC condensate drain lines
About this system
The Goodman 2.5-ton, 15.2 SEER2 AC paired with a 60,000 BTU 80% AFUE multi-speed ECM gas furnace is a horizontal-configuration system aimed at homeowners who need reliable whole-home comfort without paying premium-brand prices. At 2.5 tons, the cooling capacity is well suited to homes in the roughly 1,200 to 1,600 square foot range, depending on climate, insulation, and local heat load. The R-32 refrigerant is a forward-looking choice: it has a lower global warming potential than the outgoing R-410A and is increasingly common in new residential equipment, though it does require certified technicians familiar with its slightly higher operating pressures.
The 15.2 SEER2 rating clears the federal minimum efficiency standards for most U.S. regions, though it sits at the lower end of what the current market offers. Buyers prioritizing the lowest upfront cost will find this tier reasonable; those in high-heat climates who run their AC for six or more months a year may find that a higher-SEER2 system pays back its price premium over time. The 80% AFUE furnace means 20 cents of every heating dollar exits as exhaust, which is a real trade-off compared to 95%+ condensing furnaces, but it keeps installation simpler since it vents with standard B-vent rather than PVC. The horizontal configuration makes this system a practical fit for attic or crawlspace installs where upright equipment simply does not fit.
This Goodman system delivers a workable entry point for homeowners who need a horizontal-install gas-and-AC combo without premium-brand pricing. The 15.2 SEER2 and 80% AFUE specs are functional rather than exceptional, and long-term ownership costs depend heavily on install quality and whether you budget for likely capacitor and coil maintenance after year seven. It is a sensible buy for the cost-conscious, but not without real trade-offs in efficiency and projected longevity.
Overall score is the average of the five ratings above.
What we like
- Priced roughly 15 to 25 percent below comparable Trane, Lennox, and Carrier systems
- Horizontal configuration opens up attic and crawlspace installs not possible with upright equipment
- ECM multi-speed blower motor improves comfort consistency and reduces blower electricity use compared to single-speed PSC motors
- R-32 refrigerant is lower in global warming potential and positions the system ahead of the R-410A phase-out
- 80% AFUE vents with standard B-vent, keeping installation simpler and less expensive than a 95%+ system
Trade-offs
- 80% AFUE loses 20% of fuel as exhaust heat, a meaningful efficiency gap versus 95%+ condensing furnaces in cold climates
- 15.2 SEER2 is near the federal minimum and will not yield the energy savings of 17+ SEER2 systems in high-runtime climates
- Dual-run capacitor failures and evaporator coil leaks are documented recurring issues, particularly after year seven
- Compressor lifespan averages 10 to 14 years versus 15 to 20 years for premium brands, raising the likelihood of a mid-life replacement
What homeowners and pros say about Goodman
Homeowners who shop Goodman consistently point to price as the deciding factor, and that sentiment shows up in Google dealer reviews that average around 3.8 out of 5 across hundreds of locations, where affordability is the most frequently cited praise. The picture shifts when owners report back years later: ConsumerAffairs places Goodman at roughly 2.5 out of 5, a score shaped by the complaints-heavy nature of that channel but also by a real pattern of repair costs climbing after roughly year seven of ownership. For this horizontal gas-and-AC combo specifically, that means buyers should enter ownership with eyes open about the documented failure points: dual-run capacitors are the single most commonly reported breakdown and typically run 300 to 600 dollars to fix, which is manageable; evaporator coil leaks are a more serious and more expensive problem that shows up in a meaningful share of long-term owner reports; and compressors on Goodman equipment average 10 to 14 years of service life, shorter than the 15 to 20 years typical of premium-brand equipment.
HVAC technicians tend to hold a pragmatic view of Goodman: the equipment works when it is installed correctly and maintained, and the parts are widely stocked, which keeps service calls straightforward. The consistent caution from the trade is that Goodman’s long-term performance leans heavily on installation quality, particularly proper refrigerant charge and airflow setup, which matters even more with R-32 given that early-ownership refrigerant leaks in Goodman systems are most often traced to installation or charge errors rather than equipment defects. For a horizontal application in an attic or crawlspace, where working conditions are tighter and mistakes more likely, choosing an experienced installer and budgeting for a post-install checkup is not optional advice, it is essential.
Sources: ConsumerAffairs Goodman owner reviews, AHRI Directory of Certified Product Performance, U.S. DOE appliance and equipment efficiency standards, Goodman product specification sheets.
What it costs to run
At 15.2 SEER2, cooling this 2.5-ton system for a typical 1200-hour cooling season at the U.S. average electricity rate of $0.17/kWh works out to roughly $403 per year in cooling, about $54 less per year than a minimum-efficiency 13.4 SEER2 unit of the same size. Your real cost depends on your climate and local rate.
Method: (30,000 BTU/hr ÷ 15.2 SEER2) × 1200 hours ÷ 1000 × $0.17/kWh. Rate source: U.S. EIA average; cooling hours: moderate-climate estimate.
How it compares
| Brand | Comparable model | SEER2 | Stage | Price position |
|---|---|---|---|---|
| Goodman | GSZTO-GSX / GMVC8 Horizontal Bundle (this system) | 15.2 | Single-stage / multi-speed | Value pick |
| Carrier | Comfort 24ACC6 / 58SB0 series | 15.2 | Single-stage | 15 to 25 percent higher than this system |
| Trane | XR15 / S8X1 series | 15.2 | Single-stage | 15 to 25 percent higher than this system |
| Lennox | Merit ML15XC1 / ML196E series | 15.2 | Single-stage | 15 to 20 percent higher than this system |
Competitor rows are comparable single-stage units at similar efficiency; price is relative position, not a quote.
Questions about this system
Is a horizontal Goodman system harder to service than a standard upright installation?
It can be. Attic and crawlspace locations limit a technician's working room, which can make routine tasks like coil cleaning or capacitor replacement slower and more expensive. Budget for slightly higher labor rates on service calls compared to a basement or utility-closet install.
Why does this system use R-32 instead of R-410A, and does that affect servicing?
R-32 has a lower global warming potential than R-410A and is part of the industry-wide shift away from high-GWP refrigerants. It requires technicians certified to handle it and equipment rated for its slightly higher pressures, so confirm your service contractor is familiar with R-32 before scheduling work.
Should I upgrade to a 95% AFUE furnace instead of going with the 80% AFUE in this bundle?
In climates with long, cold winters the answer is often yes. A 95%+ condensing furnace can cut heating fuel use by 15 percent or more compared to this 80% AFUE unit. The trade-off is higher upfront cost and the need for PVC flue and condensate drain lines, which adds installation complexity.
How concerned should I be about the documented evaporator coil leaks in Goodman equipment?
Coil leaks appear in a meaningful share of owner reviews and tend to surface several years into ownership. An R-32 leak also means refrigerant recovery and recharge by a certified tech, which raises the repair cost. Buying an extended labor warranty at installation is worth considering specifically because of this documented failure mode.
What does the 15.2 SEER2 rating actually mean for my electricity bill?
SEER2 measures seasonal cooling efficiency under updated, more realistic test conditions. At 15.2 SEER2 this system meets federal standards for most regions but is not a high-efficiency unit. Homeowners in mild climates with shorter cooling seasons are unlikely to notice a large difference versus a 17 SEER2 system, but those running AC five or more months a year will pay more to operate this unit than a higher-rated alternative.
Specifications
| Cooling capacity | 2.5 Ton |
| Efficiency | 15.2 SEER2 |
| Furnace output | 60000 BTU |
| Furnace efficiency | 80% AFUE |
| Configuration | Horizontal |
| Refrigerant | R-32 |