ACiQ 2.5 Ton Package Unit Cooling Only Air Conditioning | 13.4 SEER2 Horizontal Airflow | R454B
Check current price on AC Direct →
Key features
- 2.5-ton cooling capacity, horizontal airflow for mobile home and manufactured housing installations
- 13.4 SEER2 efficiency, meeting current federal minimum standards
- R-454B refrigerant, a lower-GWP replacement for R-410A
- Cooling-only configuration, no heat strip or heat pump option in this model
- Single self-contained cabinet houses compressor, condenser, and evaporator
- 12-year parts warranty included, no dealer markup required to activate
About this system
The ACiQ 2.5 Ton Cooling-Only Package Unit is a self-contained, horizontal-discharge system that houses the compressor, condenser coil, and evaporator coil in a single cabinet. That configuration is designed specifically for mobile homes, manufactured housing, and crawl-space or side-wall installations where a traditional split system is impractical or impossible. At 2.5 tons it targets homes in roughly the 1,200 to 1,600 square foot range, though your actual sizing need depends on insulation quality, climate zone, and ceiling height.
On the efficiency side, a 13.4 SEER2 rating meets the current federal minimum for most of the United States and sits at the entry tier of the efficiency scale. It will cost more to run annually than a 16 or 18 SEER2 unit, but the lower purchase price can offset that gap over a mid-length ownership horizon, particularly in moderate climates where the system does not run at full load all summer. The unit uses R-454B refrigerant, which is a lower global-warming-potential replacement for R-410A and is now the industry standard for new equipment, meaning parts and recharge service should remain available as the refrigerant transition plays out across the industry.
The ACiQ 2.5-ton horizontal package unit is a competitively priced entry-level option for mobile homes and manufactured housing that need a self-contained cooling solution. Its 13.4 SEER2 rating is functional rather than impressive, and the brand's short track record means long-term reliability is still an open question. Buyers who prioritize upfront cost savings and can tolerate some uncertainty around service support will find it worth considering.
Overall score is the average of the five ratings above.
What we like
- Lower purchase price than comparable Carrier, Trane, or Lennox package units
- 12-year parts warranty ships with the unit at no extra cost or dealer activation fee
- R-454B refrigerant is future-compatible with current and anticipated regulations
- Horizontal airflow design matches the actual duct configuration of most manufactured homes
- Early owner reports point to quiet operation and responsive direct-brand support
Trade-offs
- 13.4 SEER2 is the regulatory floor, so operating costs are higher than mid- or high-efficiency alternatives
- Brand is relatively new, so independent long-term reliability data and Consumer Reports rankings do not yet exist
- Actual manufacturer is undisclosed, which complicates parts sourcing and cross-referencing service history
- No dealer network means you must find and vet your own independent contractor for installation and future service
What homeowners and pros say about ACiQ
Owners of manufactured homes who have installed the ACiQ horizontal package unit tend to highlight two things in early feedback: the unit runs noticeably quietly for a single-stage system, and when questions come up the direct-to-consumer support channel has been responsive. Those are meaningful positives in a product category where noise and post-sale support are common complaints. Consumer Reports has not yet assigned ACiQ a reliability score because the brand is new enough that long-term data is still accumulating, so the positive early impressions should be read as preliminary rather than confirmed.
On the contractor side, the undisclosed manufacturer is the most commonly raised concern among HVAC technicians. Without knowing the actual OEM, cross-referencing parts availability, service bulletins, and component histories is harder than with an established name brand. The specific failure modes worth watching on any package unit in this class include capacitor degradation in high-heat environments, potential refrigerant coil leaks over time as the R-454B transition matures, and compressor longevity under heavy seasonal load. None of these have been documented at elevated rates for ACiQ specifically, but they are the areas where the absence of long-term independent data leaves real uncertainty for buyers making a ten-plus-year investment.
Sources: Consumer Reports heat pump ratings, HVACDirect on the ACiQ brand, AHRI Directory of Certified Product Performance, U.S. DOE appliance and equipment efficiency standards.
What it costs to run
At 13.4 SEER2, cooling this 2.5-ton system for a typical 1200-hour cooling season at the U.S. average electricity rate of $0.17/kWh works out to roughly $457 per year in cooling, about $0 less per year than a minimum-efficiency 13.4 SEER2 unit of the same size. Your real cost depends on your climate and local rate.
Method: (30,000 BTU/hr ÷ 13.4 SEER2) × 1200 hours ÷ 1000 × $0.17/kWh. Rate source: U.S. EIA average; cooling hours: moderate-climate estimate.
How it compares
| Brand | Comparable model | SEER2 | Stage | Price position |
|---|---|---|---|---|
| ACiQ | 2.5 Ton Cooling-Only Package Unit 13.4 SEER2 Horizontal R-454B | 13.4 | Single-stage | Value pick |
| Carrier | WeatherMaster 50XC Series | 14.0 | Single-stage | Moderately higher than ACiQ |
| Trane | Precedent WCD Series | 14.0 | Single-stage | Moderately higher than ACiQ |
| Lennox | Elite XC14 Packaged Unit | 14.3 | Single-stage | Higher than ACiQ |
Competitor rows are comparable single-stage units at similar efficiency; price is relative position, not a quote.
Questions about this system
Will this unit fit the existing ductwork in my manufactured home?
Horizontal package units are specifically engineered for the duct connections found in most HUD-code manufactured homes, but you should confirm the cabinet dimensions, supply and return plenum openings, and airflow direction match your existing setup before ordering. A local HVAC contractor can measure your current unit and verify compatibility.
Do I need a separate heat source, or does this unit handle heating too?
This model is cooling only and does not include a heat pump or electric heat strips. You will need a separate furnace, heat strip kit in a compatible air handler, or another heat source to cover the winter months.
How do I get warranty service if there is no ACiQ dealer near me?
ACiQ sells direct and relies on independent HVAC contractors for installation and service. In practice this means you call and hire a licensed local technician yourself rather than scheduling through a brand dealer. ACiQ's direct support line can assist with warranty claims, but coordinating the service visit is your responsibility.
Is R-454B refrigerant harder to find or service than R-410A right now?
R-454B is the industry-standard replacement refrigerant for new residential equipment and is stocked by most HVAC distributors, though it is still less universally available than R-410A at smaller independent shops. Availability will improve as R-410A equipment ages out, so this should be less of a concern over the system's lifespan than it might be today.
How does the 13.4 SEER2 rating affect my monthly electric bill compared to a higher-efficiency option?
A 13.4 SEER2 unit runs less efficiently than, say, a 16 SEER2 model, so you will pay more per cooling hour. The actual dollar difference depends on your local electricity rate, how many hours the system runs, and your climate. In a moderate climate the annual difference may be modest enough that the lower purchase price offsets it over several years, but in hot, high-run-hour climates the efficiency gap matters more.
Specifications
| Cooling capacity | 2.5 Ton |
| Efficiency | 13.4 SEER2 |
| Configuration | Horizontal |
| Refrigerant | R-454B |