ACiQ 4 Ton Package Unit Cooling Only Air Conditioning | 13.4 SEER2 Horizontal Airflow | R454B
Check current price on AC Direct →
Key features
- 4-ton capacity for homes roughly 1,800 to 2,400 sq ft depending on load
- 13.4 SEER2 efficiency rating meets current federal minimum standards
- Horizontal airflow configuration for manufactured homes and crawl-space installs
- R-454B refrigerant with lower global-warming potential than legacy R-410A
- Cooling-only package unit with compressor, condenser, and evaporator in one cabinet
- 12-year parts warranty shipped direct with no dealer markup added
About this system
The ACiQ 4-Ton Cooling-Only Package Unit is a self-contained, horizontal-discharge system that houses the compressor, condenser coil, and evaporator coil in a single cabinet. That single-cabinet design makes it a practical choice for manufactured homes, mobile homes, and crawl-space or slab installations where a split system would require running refrigerant lines between two separate units. At 4 tons it is sized for homes roughly in the 1,800 to 2,400 square foot range, depending on climate zone, insulation quality, and ceiling height.
The 13.4 SEER2 rating lands at the current federal minimum efficiency tier for most U.S. regions, which means this unit meets the bar but does not exceed it. Buyers who want lower operating costs over time should know that higher-SEER2 options exist, though they cost more upfront. The refrigerant is R-454B, a lower global-warming-potential replacement for R-410A that is now standard across new equipment. Horizontal airflow configuration means the unit connects to ductwork running out from the side rather than the bottom, which suits tight under-home installations. This is a cooling-only unit, so a separate furnace or electric heat strip kit would be required if heating is needed.
The ACiQ 4-Ton Cooling-Only Package Unit is a cost-competitive entry point for buyers who need a horizontal-discharge package unit and are not chasing top-tier efficiency. The 12-year warranty and direct pricing give it a real edge over name-brand equivalents at the same efficiency level, but the undisclosed manufacturer, thin long-term reliability data, and direct-sale service model are genuine trade-offs that buyers should weigh carefully before committing.
Overall score is the average of the five ratings above.
What we like
- Direct-to-consumer pricing undercuts comparable name-brand package units at the same 13.4 SEER2 tier
- 12-year parts warranty ships with the unit and is not subject to dealer markup or registration delays
- R-454B refrigerant is forward-compatible with evolving EPA refrigerant regulations
- Single-cabinet horizontal design simplifies installation in manufactured homes and tight crawl spaces
- Early owner reports consistently note quiet operation and responsive customer support from ACiQ
Trade-offs
- 13.4 SEER2 is the federal minimum efficiency floor, so long-term utility savings are limited compared to higher-efficiency alternatives
- The actual manufacturer is undisclosed, making parts cross-referencing and service history harder to verify than with a named brand
- Sold direct rather than through a dealer network, so service depends entirely on finding a qualified independent contractor
- Consumer Reports has not yet ranked ACiQ due to insufficient long-term field data, leaving reliability performance largely unproven over multi-year horizons
What homeowners and pros say about ACiQ
Owners who have installed ACiQ package units in manufactured homes tend to report that the units run quietly and that ACiQ’s customer support line is easier to reach than what they experienced with big-box or distributor-sold equipment. Early feedback points to solid out-of-box performance, though it is worth noting that most of these reviews cover the first one to three years of operation. Consumer Reports has not yet ranked ACiQ due to insufficient long-term data, so there is no independent multi-year reliability benchmark available yet. That absence of data is itself a meaningful data point: buyers are taking a moderate leap of faith on a newer brand, however favorable early signals may be.
HVAC contractors who encounter ACiQ units in the field report no unusual installation hurdles with horizontal package units specifically, since the configuration is conventional and R-454B is increasingly familiar. The friction shows up at the service stage: because the manufacturing source is not publicly disclosed, technicians cannot easily pull up cross-referenced parts catalogs or factory service bulletins the way they can with a unit that is clearly traceable to a Carrier or ICP product line. Documented risk areas common to entry-level package units generally include capacitor wear, potential coil leaks over extended use, and compressor longevity under heavy cycling loads. ACiQ’s direct-sale model means there is no dealer acting as a local warranty advocate, which is either a non-issue or a genuine gap depending on how responsive ACiQ remains if a claim becomes complicated.
Sources: Consumer Reports heat pump ratings, HVACDirect on the ACiQ brand, AHRI Directory of Certified Product Performance, U.S. DOE appliance and equipment efficiency standards.
What it costs to run
At 13.4 SEER2, cooling this 4-ton system for a typical 1200-hour cooling season at the U.S. average electricity rate of $0.17/kWh works out to roughly $731 per year in cooling, about $0 less per year than a minimum-efficiency 13.4 SEER2 unit of the same size. Your real cost depends on your climate and local rate.
Method: (48,000 BTU/hr ÷ 13.4 SEER2) × 1200 hours ÷ 1000 × $0.17/kWh. Rate source: U.S. EIA average; cooling hours: moderate-climate estimate.
How it compares
| Brand | Comparable model | SEER2 | Stage | Price position |
|---|---|---|---|---|
| ACiQ | 4-Ton Cooling-Only Package Unit 13.4 SEER2 Horizontal R-454B | 13.4 | Single-stage | Value pick |
| Carrier | WeatherMaster 50XC Series | 14.0 | Single-stage | Moderately higher than ACiQ |
| Trane | Precedent 4TWC0 Series | 14.0 | Single-stage | Moderately higher than ACiQ |
| Lennox | LRP14AC Series | 14.0 | Single-stage | Moderately to significantly higher than ACiQ |
Competitor rows are comparable single-stage units at similar efficiency; price is relative position, not a quote.
Questions about this system
Does this unit include electric heat, or do I need to add a heat strip separately?
This is a cooling-only package unit, so it provides no heating on its own. If you need heat, you would need to purchase a compatible electric heat strip kit and have it installed separately, or pair the unit with a gas furnace where your ductwork configuration allows.
Will a standard HVAC contractor be able to service this unit, or do I need an ACiQ-certified technician?
Any licensed HVAC technician can work on it since it uses standard refrigerant (R-454B) and conventional package-unit components. The one practical complication is that the actual manufacturer is not disclosed by ACiQ, which can make cross-referencing OEM parts or service bulletins less straightforward than with a clearly labeled Carrier or Trane unit.
Is 13.4 SEER2 going to cost me significantly more to run than a higher-efficiency unit?
At the federal efficiency minimum, you will pay more in electricity over the unit's lifespan compared to a 16 or 18 SEER2 unit, particularly in hot climates with long cooling seasons. Whether the upfront cost savings offset that depends on your local electricity rates, how many hours per year the system runs, and how long you stay in the home.
How does the 12-year warranty work when there is no local dealer involved?
ACiQ handles warranty claims directly, and the 12-year parts coverage ships with the unit without requiring dealer registration or markup. Labor is not covered, which is typical across most HVAC brands, so you would still need to pay your contractor for the service call if a covered part fails.
Is R-454B refrigerant harder to find or more expensive to service than R-410A?
R-454B availability is still catching up to R-410A in some markets, so it is worth confirming that your local service contractors stock it before you buy. Over time, R-454B is expected to become the new standard as R-410A is phased down under EPA regulations, so this unit is positioned on the right side of that transition.
Specifications
| Cooling capacity | 4 Ton |
| Efficiency | 13.4 SEER2 |
| Configuration | Horizontal |
| Refrigerant | R-454B |