ACiQ

ACiQ 44000 BTU Gas Furnace – 80% Multi-18 Speed ECM Multi-Positional (N80MSN0451714A)

44000 BTU • 80% AFUE
ACiQ 44000 BTU Gas Furnace - 80% Multi-18 Speed ECM Multi-Positional (N80MSN0451714A)
Complete system
Complete system
✓ In stock, ships nationwide
Price
$1,079.00
Your total$1,079.00
Add to cart for an even lower price. Manufacturer pricing rules limit what we can show here, so your final discounted total appears in the AC Direct cart, with no obligation.

Check current price on AC Direct →

Free shippingTo your door
Price PromiseAC Direct
25 yearsHVAC expertise

Need it installed? We will connect you with a local HVAC contractor who can quote and install this system.Find a Contractor →

Key features

  • 44,000 BTU heat output suits smaller homes and zone additions
  • 80% AFUE single-heat-exchanger design, no condensate drain required
  • 18-speed ECM blower motor reduces electricity use and noise versus PSC motors
  • Multi-positional cabinet installs upflow, downflow, or horizontal
  • 12-year parts warranty included, no dealer registration required
  • Sold factory-direct, eliminating dealer markup from the purchase price

About this system

The ACiQ N80MSN0451714A is a 44,000 BTU, 80% AFUE single-stage gas furnace built around an 18-speed ECM blower motor. That ECM (electronically commutated motor) is the headline feature here: it ramps airflow up and down in small increments rather than just switching between high and low, which reduces drafts, lowers electricity consumption at the blower, and keeps the system quieter than a standard PSC-motor furnace at the same output rating. At 44,000 BTU of heat output, this unit is sized for smaller homes, typically in the 1,000 to 1,600 square foot range depending on your climate zone and insulation level, though a proper Manual J load calculation should always drive that decision.

The 80% AFUE rating means the furnace converts eight of every ten units of gas into usable heat, with the other twenty percent going up the flue. That is the federally mandated minimum efficiency floor for most of the northern U.S. and is sufficient for mild to moderate climates, but homeowners in very cold regions should weigh whether a 96% or higher condensing furnace would recoup its higher upfront cost through lower gas bills over time. The multi-positional cabinet means the unit can be installed upflow, downflow, or horizontal, giving an installer flexibility in tight mechanical rooms or crawl spaces. ACiQ sells direct, so the price you see includes no dealer margin, and the 12-year warranty ships with the unit rather than requiring professional registration to activate.

The HVAC.best Review
Reviewed by Dave Watson, HVAC.best
Score 3.4/5

The ACiQ 44,000 BTU 80% ECM furnace is a competitively priced entry point for smaller homes that need reliable gas heat without paying name-brand premiums. The ECM motor is a genuine upgrade over PSC-motor competitors at this price tier, and the 12-year warranty is strong. The trade-off is that the brand is still accumulating a long-term service record, and the undisclosed manufacturer makes parts sourcing and cross-referencing more complicated than it would be with a Carrier or Trane nameplate.

Efficiency2.5
Value4.0
Reliability3.0
Warranty4.0
Install-friendliness3.5

Overall score is the average of the five ratings above.

What we like

  • 18-speed ECM motor meaningfully cuts blower electricity costs versus standard motors
  • Factory-direct pricing undercuts name brands for comparable efficiency and features
  • 12-year parts warranty arrives with the unit, no dealer activation hoops
  • Multi-positional cabinet gives installers more placement flexibility
  • Early owner feedback consistently cites quiet operation and responsive ACiQ support

Trade-offs

  • 80% AFUE is code-minimum in many northern states and will cost more to operate than 95%+ condensing alternatives
  • Unknown original manufacturer complicates parts sourcing and makes cross-referencing service bulletins harder
  • No dealer network means you must source and vet your own independent contractor for installation and service
  • Long-term reliability data is still thin, Consumer Reports has not yet assigned a score to the brand
Best for: Budget-conscious homeowners in mild to moderate climates replacing a furnace in a smaller home who are comfortable hiring their own contractor and can tolerate a newer brand's limited service history. Look elsewhere if If you live in a cold northern climate, plan to stay in the home long-term, or strongly prefer a brand with a deep independent service network and decades of Consumer Reports data, a 95%+ AFUE furnace from Carrier, Trane, or Lennox will likely serve you better despite the higher upfront cost.

What homeowners and pros say about ACiQ

Early ACiQ furnace owners tend to report that the unit runs quietly and that the company’s direct support line is genuinely responsive when questions come up, which stands out compared to the sometimes slow dealer-mediated service experience buyers get with name brands. Consumer Reports has not yet assigned ACiQ a reliability score because the brand is too new to have accumulated the long-term failure data that rating requires, and that absence is worth taking seriously rather than dismissing. Because the actual manufacturing source is not publicly disclosed, an independent technician who needs to track down a specific part or a technical service bulletin for this furnace will not have the same cross-referencing resources available that exist for a Carrier or Trane unit with decades of documented service history.

For this specific furnace, the conversation among buyers who do their homework tends to focus on two honest questions: whether 80% AFUE is the right efficiency choice for their climate and fuel costs, and whether the savings from direct pricing outweigh the uncertainty of a newer brand with a thinner service record. The 18-speed ECM blower is a real feature that earns its keep in daily electricity costs and comfort, and the 12-year warranty that ships without dealer registration is a genuine differentiator at this price point. The trade-offs are equally real: no dealer network to lean on, an undisclosed manufacturer that complicates parts sourcing, and a brand that simply has not yet had the time to prove out its long-term reliability the way the established names have.

Sources: Consumer Reports heat pump ratings, HVACDirect on the ACiQ brand, AHRI Directory of Certified Product Performance, U.S. DOE appliance and equipment efficiency standards.

How it compares

Brand Comparable model SEER2 Stage Price position
ACiQ N80MSN0451714A N/A (furnace only) Single-stage with 18-speed ECM blower Value pick
Carrier Performance 80 (58TP) N/A (furnace only) Two-stage Moderately higher due to dealer network and brand premium
Trane S8X1 80% AFUE N/A (furnace only) Single-stage Higher with dealer installation and markup included
Lennox Merit ML180 N/A (furnace only) Single-stage Higher with dealer markup; similar efficiency tier

Competitor rows are comparable single-stage units at similar efficiency; price is relative position, not a quote.

Questions about this system

Does 80% AFUE still meet code for my area, and should I just buy the higher-efficiency model instead?

80% AFUE is the federal minimum for non-condensing furnaces, but some northern states and municipalities have adopted stricter codes requiring 90% or higher, so check local requirements before purchasing. If you heat your home heavily from October through April, the gas savings from a 95%+ condensing furnace can offset its higher purchase price within several years, making it worth a serious look even if 80% is technically allowed where you live.

What does the 18-speed ECM motor actually do differently from a standard furnace blower?

An ECM motor adjusts its speed in small steps to match the airflow the system actually needs at any moment, rather than running at full blast whenever the furnace fires. In practice this means lower electricity draw during most operating hours, less noise, and more even temperature distribution through your ductwork compared to a standard single-speed PSC motor.

Since ACiQ is sold direct, who installs it and will any HVAC contractor work on it?

ACiQ sells through its website and you arrange installation with an independent licensed HVAC contractor of your choosing. Most qualified contractors can install and service any brand of gas furnace, but because ACiQ does not disclose its manufacturing source, a tech who wants to cross-reference parts or technical service bulletins may have a harder time than with a Carrier or Trane unit that has a well-documented parts ecosystem.

Is the 12-year warranty really 12 years, or are there registration requirements or fine print that shorten it?

ACiQ states the 12-year parts warranty ships with the unit without requiring dealer registration, which is a genuine advantage over brands that drop coverage to five or ten years if you miss a registration window. That said, you should read the current warranty document before purchase, as terms can change, and confirm whether labor costs are covered separately or fall entirely on you.

Can this furnace be installed horizontally in a crawl space or attic, and does the configuration affect the warranty?

Yes, the multi-positional cabinet is rated for upflow, downflow, and horizontal installation, which is why it suits tight crawl spaces, attics, and closet installations where a single-position unit would not fit. Confirm with your contractor that the flue and gas connections are properly configured for the chosen orientation, as improper venting regardless of brand can void a warranty and create safety hazards.

Specifications

Furnace output 44000 BTU
Furnace efficiency 80% AFUE
Image, specs, price and configurable options read from the AC Direct product page