Goodman

Goodman 3 Ton 80000 BTU 13.4 SEER2 Gas/Electric Package Unit Multiposition

80000 BTU • Model GPGM33608041
Goodman 3 Ton 80000 BTU 13.4 SEER2 Gas/Electric Package Unit Multiposition
Complete system
Complete system
Condenser
Condenser
Check availability at AC Direct
Price
$4,437.00
Your total$4,437.00
Add to cart for an even lower price. Manufacturer pricing rules limit what we can show here, so your final discounted total appears in the AC Direct cart, with no obligation.

Check current price on AC Direct →

Free shippingTo your door
Price PromiseAC Direct
25 yearsHVAC expertise

Need it installed? We will connect you with a local HVAC contractor who can quote and install this system.Find a Contractor →

Key features

  • 3-ton cooling capacity with 80,000 BTU gas heat in a single self-contained cabinet
  • 13.4 SEER2 efficiency rating, meeting federal minimum standards for most U.S. regions
  • Multiposition design supports downflow or horizontal discharge installation
  • Single-stage compressor and gas valve for straightforward operation and lower parts complexity
  • Factory-tested package unit construction reduces field refrigerant connections and potential leak points
  • Goodman's 10-year parts limited warranty (registration required within 60 days of install)

About this system

The Goodman GPGM33608041 is a 3-ton, 80,000 BTU gas/electric package unit rated at 13.4 SEER2. A package unit bundles the air conditioner, gas furnace, and air handler into a single rooftop or ground-level cabinet, making it a common choice for homes with no basement or indoor mechanical room, manufactured housing, and light commercial applications where ductwork connects directly to the unit. The multiposition configuration means the unit can be installed in either a downflow or horizontal discharge arrangement, giving installers flexibility depending on how the duct system exits the structure.

At 13.4 SEER2, this unit sits at the federal minimum efficiency tier for most U.S. climate zones, which means operating costs will be higher than mid-efficiency or high-efficiency alternatives but the upfront price is lower. The 80,000 BTU gas heat section is a solid match for the 3-ton cooling capacity in climates with moderate to cold winters, covering roughly 1,200 to 1,800 square feet depending on insulation, ceiling height, and local design temperatures. Homeowners prioritizing a straightforward, single-stage system with lower first cost over long-term energy savings will find this unit squarely aimed at them.

The HVAC.best Review
Reviewed by Dave Watson, HVAC.best
Score 3.3/5

The GPGM33608041 delivers reliable entry-level cooling and gas heat in a single cabinet at a price point that is hard to match from premium brands, but buyers should go in knowing they are accepting baseline efficiency, a compressor lifespan that tends to run shorter than premium alternatives, and a brand reputation that hinges heavily on who installs it. It is a workable choice for budget-conscious homeowners who plan to stay in their home 10 to 12 years and prioritize low upfront cost over long-term operating savings.

Efficiency2.5
Value4.0
Reliability3.0
Warranty3.5
Install-friendliness3.5

Overall score is the average of the five ratings above.

What we like

  • Priced 15 to 25 percent below comparable Carrier, Trane, and Lennox package units
  • All-in-one cabinet simplifies installation where no indoor mechanical space is available
  • Multiposition flexibility accommodates a wider range of duct configurations
  • Factory refrigerant charge reduces field leak risk compared to split systems requiring field brazing
  • 10-year parts warranty (when registered) provides meaningful coverage on major components

Trade-offs

  • 13.4 SEER2 is the minimum efficiency tier, so monthly energy bills will be higher than mid- or high-efficiency options
  • Dual-run capacitor failures are the most commonly reported repair, typically surfacing within the first several years
  • Compressor longevity averages 10 to 14 years versus 15 to 20 years seen in premium brands, a real gap for owners planning a long stay
  • ConsumerAffairs feedback (around 2.5 out of 5) reflects a pattern of rising repair costs after roughly year 7, which can erode the initial savings
Best for: Homeowners or property managers who need a proven package-unit format at the lowest possible upfront cost and expect to be out of the system within 10 to 12 years. Look elsewhere if If you plan to stay in the home 15 or more years, run the system heavily, or live in a high-energy-cost region, the lifetime operating cost difference of a higher-SEER2 or premium-brand unit can outweigh the initial savings this Goodman offers.

What homeowners and pros say about Goodman

Homeowners who have lived with the GPGM33608041 or similar Goodman package units tend to echo what the broader brand data shows. Google dealer reviews across Goodman dealers average around 3.8 out of 5, and the most consistent praise is simply that the unit does what it promises at a price that leaves room in the budget. On the other side, ConsumerAffairs feedback lands near 2.5 out of 5, and the pattern there is specific: owners who bought in are often satisfied in years one through six, but a portion report that repair costs begin stacking up after year seven, eating into the savings they captured at purchase. The documented failure modes are worth knowing before you commit. Dual-run capacitors are the most commonly reported breakdown on Goodman equipment, and while they are generally a low-cost fix in the 300 to 600 dollar range, they can catch owners off guard if they were expecting a trouble-free decade. Evaporator coil leaks show up in a meaningful share of long-term owner reviews, and compressor lifespan tends to land in the 10 to 14 year range rather than the 15 to 20 years that owners of premium-brand equipment more often report.

HVAC technicians who work on these units regularly point to something the brand ratings alone do not capture: install quality is the single biggest variable in how a Goodman performs over time. A properly commissioned unit with a correct refrigerant charge, clean electrical connections, and well-sealed ductwork will outperform a poorly installed premium unit in almost every measurable way. The minority of owners who report refrigerant leaks within the first year are frequently dealing with a charge or connection issue from installation rather than a factory defect. For a package unit in particular, where the factory refrigerant charge is already set and field refrigerant connections are minimal, that risk is somewhat lower than with a field-assembled split system. The bottom line from both camps is consistent: the Goodman GPGM33608041 is a reasonable gamble if you hire a skilled installer, go in with realistic expectations about longevity, and treat the warranty registration as a mandatory first step.

Sources: ConsumerAffairs Goodman owner reviews, AHRI Directory of Certified Product Performance, U.S. DOE appliance and equipment efficiency standards, Goodman product specification sheets.

What it costs to run

At 13.4 SEER2, cooling this 3-ton system for a typical 1200-hour cooling season at the U.S. average electricity rate of $0.17/kWh works out to roughly $548 per year in cooling, about $0 less per year than a minimum-efficiency 13.4 SEER2 unit of the same size. Your real cost depends on your climate and local rate.

Method: (36,000 BTU/hr ÷ 13.4 SEER2) × 1200 hours ÷ 1000 × $0.17/kWh. Rate source: U.S. EIA average; cooling hours: moderate-climate estimate.

How it compares

Brand Comparable model SEER2 Stage Price position
Goodman GPGM33608041 13.4 Single-stage Value pick
Carrier WeatherMaster 48XC (base series) 13.4 Single-stage Typically 15 to 25 percent more than the Goodman
Trane Precedent YSC036 series 13.4 Single-stage Typically 15 to 25 percent more than the Goodman
Lennox LRP14GE series 14.0 Single-stage Typically 15 to 25 percent more than the Goodman

Competitor rows are comparable single-stage units at similar efficiency; price is relative position, not a quote.

Questions about this system

Does the 10-year parts warranty cover the compressor and heat exchanger, and what do I need to do to activate it?

Goodman's 10-year limited parts warranty covers the compressor, heat exchanger, and other functional parts, but it requires product registration within 60 days of installation. Without registration, coverage typically drops to five years on parts, so registering promptly at Goodman's website is worth the few minutes it takes.

How often do the capacitors fail on this unit, and what does that repair typically cost?

Dual-run capacitor failure is the most frequently reported repair on Goodman package and split systems. It is generally a straightforward fix that most HVAC technicians can handle in under an hour, with typical repair bills in the 300 to 600 dollar range including parts and labor. The good news is it is one of the least disruptive and least expensive common failures in any residential system.

Is 13.4 SEER2 going to meet efficiency requirements in my state?

13.4 SEER2 meets the federal minimum for most U.S. climate zones as of the 2023 DOE standards, but a handful of states or local jurisdictions may have additional requirements. Check with your installer about local code before purchasing, particularly if you are in the Southeast or Southwest where regional minimums can be slightly higher for certain equipment types.

Can this package unit be installed on a rooftop or does it only work at ground level?

Package units like the GPGM33608041 are designed for both rooftop curb mounting and ground-level pad installation, which is one of the main advantages of the format. The multiposition configuration means the duct connection can exit downward through a roof curb or horizontally at ground level, so your installer will select the arrangement that matches your existing duct stub-outs.

How does Goodman's real-world reliability compare to what I hear from HVAC contractors?

Technician opinions on Goodman are genuinely mixed. Google dealer reviews across locations average around 3.8 out of 5, where affordability is the most common praise, while ConsumerAffairs sits near 2.5 out of 5, a complaint-heavy channel where the recurring issue is repair costs climbing after year 7. Contractors consistently point to install quality as the single biggest factor in how long a Goodman lasts, so choosing an experienced, licensed installer matters at least as much as the brand itself.

Specifications

Cooling capacity 3 Ton
Efficiency 13.4 SEER2
Furnace output 80000 BTU
Model GPGM33608041
Image, specs, price and configurable options read from the AC Direct product page