Goodman 4 Ton 13.4 SEER2 Heat Pump Package Unit Multiposition
Check current price on AC Direct →
Key features
- 4-ton capacity suited to roughly 1,800 to 2,400 square feet depending on climate and insulation
- 13.4 SEER2 efficiency meets 2023 federal minimum standards
- Single-cabinet package unit combines compressor, coil, and air handler in one outdoor assembly
- Multiposition design supports horizontal or vertical airflow to match existing duct layout
- Heat pump operation provides both heating and cooling without a separate gas furnace
- Compatible with supplemental electric heat strips for colder climate applications
About this system
The Goodman 4-ton 13.4 SEER2 heat pump package unit is a single-piece, all-in-one system that houses the compressor, air handler, and coil in one cabinet designed to sit outdoors or on a rooftop. Because everything ships in one box and connects to a single set of supply and return ducts, it is the go-to configuration for manufactured homes, light commercial spaces, and homes without a mechanical closet or attic for a split-system air handler. The multiposition design means the unit can be oriented to discharge air horizontally or vertically, giving installers flexibility when duct routing is constrained.
At 13.4 SEER2, this system meets the federal minimum efficiency standard that took effect in 2023 and nothing more. Cooling costs will be noticeably higher than a 16-plus SEER2 system over a long ownership period, but the lower purchase price can offset that gap if you are in a moderate climate or plan to sell the home within a decade. The heat pump function provides both heating and cooling from one unit, which eliminates a separate gas furnace and its fuel costs in mild to moderate winter climates. In areas where temperatures regularly drop below 25 to 30 degrees Fahrenheit, a supplemental electric heat strip is typically added, so buyers in cold climates should confirm that configuration with their installer.
This Goodman package unit is a serviceable, budget-conscious choice for buyers who need a straightforward all-in-one replacement and want to spend less upfront than premium brands demand. Efficiency is entry-level, and long-term ownership costs depend heavily on how well the system is installed and how proactive you are about maintenance. It is a practical tool, not a set-it-and-forget-it investment.
Overall score is the average of the five ratings above.
What we like
- Purchase price runs roughly 15 to 25 percent below comparable Carrier, Trane, and Lennox package units
- Single-cabinet design simplifies installation where split systems are impractical
- Multiposition airflow gives installers flexibility with existing duct configurations
- Heat pump function eliminates reliance on gas, lowering operating costs in mild climates
- Replacement parts, including the commonly failed dual-run capacitor, are widely stocked and affordable
Trade-offs
- 13.4 SEER2 is the lowest efficiency tier available; monthly energy costs will be higher than mid- or high-efficiency alternatives
- Compressor lifespan averages 10 to 14 years, shorter than the 15 to 20 years documented for premium brands
- Evaporator coil leaks and early refrigerant loss appear in a meaningful share of owner reports, with first-year leaks often traced to install or charge issues
- ConsumerAffairs reviews average around 2.5 out of 5, with repair costs after year 7 as the most repeated concern
What homeowners and pros say about Goodman
Homeowners who post about Goodman package units in online forums and on Google dealer review pages tend to land in two camps. Those who had a skilled installer and keep up with annual service often report years of trouble-free operation and consistently praise the lower purchase price as the deciding factor. Google dealer reviews across Goodman-selling contractors average around 3.8 out of 5, and affordability is the phrase that shows up most often in positive write-ups. The frustration side of the ledger is more pronounced on ConsumerAffairs, where the brand averages roughly 2.5 out of 5 and the dominant complaint is repair bills that start compounding after about year 7 of ownership.
HVAC technicians who service these units point to the dual-run capacitor as the most predictable failure, a relatively inexpensive fix in the 300 to 600 dollar range that most experienced technicians can handle in under an hour. More concerning to pros is the documented pattern of evaporator coil leaks and, in a smaller subset of cases, refrigerant loss within the first year of operation, which they typically attribute to loose fittings or an improper charge during installation rather than a defect in the equipment itself. Compressor longevity is the other consistent talking point: Goodman compressors tend to average 10 to 14 years in service, while premium brands often see 15 to 20. For this 4-ton package unit specifically, technicians stress that the single-cabinet format demands precise airflow setup at installation, and that skimping on startup commissioning is one of the fastest ways to shorten the system’s lifespan regardless of brand.
Sources: ConsumerAffairs Goodman owner reviews, AHRI Directory of Certified Product Performance, U.S. DOE appliance and equipment efficiency standards, Goodman product specification sheets.
What it costs to run
At 13.4 SEER2, cooling this 4-ton system for a typical 1200-hour cooling season at the U.S. average electricity rate of $0.17/kWh works out to roughly $731 per year in cooling, about $0 less per year than a minimum-efficiency 13.4 SEER2 unit of the same size. Your real cost depends on your climate and local rate.
Method: (48,000 BTU/hr ÷ 13.4 SEER2) × 1200 hours ÷ 1000 × $0.17/kWh. Rate source: U.S. EIA average; cooling hours: moderate-climate estimate.
How it compares
| Brand | Comparable model | SEER2 | Stage | Price position |
|---|---|---|---|---|
| Goodman | 4-Ton 13.4 SEER2 Heat Pump Package Unit Multiposition | 13.4 | Single-stage | Value pick |
| Carrier | WeatherMaster 50XC Series | 14.0 | Single-stage | Typically 15 to 25 percent more than Goodman |
| Trane | Precedent 4TWP Series | 14.0 | Single-stage | Typically 15 to 25 percent more than Goodman |
| Lennox | LRP14HP Series | 14.0 | Single-stage | Typically 15 to 25 percent more than Goodman |
Competitor rows are comparable single-stage units at similar efficiency; price is relative position, not a quote.
Questions about this system
Is a 4-ton heat pump package unit the right size for my home?
Four tons is generally appropriate for homes in the 1,800 to 2,400 square foot range, but square footage alone is not enough to size a system. Ceiling height, insulation levels, window area, and local climate all affect the correct load calculation. Have a contractor perform a Manual J load calculation before ordering to confirm this tonnage is correct for your specific situation.
Will this heat pump keep my home warm in winter without a backup heat source?
Standard heat pumps lose heating capacity as outdoor temperatures fall, and most struggle significantly below 25 to 30 degrees Fahrenheit. In climates that regularly see temperatures in that range or lower, you will need electric heat strips added to this package unit. Confirm with your installer whether auxiliary heat is included or must be ordered separately.
How does 13.4 SEER2 affect my monthly electric bill compared to a higher-efficiency model?
The 13.4 SEER2 rating is the federal minimum for 2023, so this unit is less efficient than 16-plus SEER2 systems. The difference translates to measurably higher cooling costs over time, and the gap widens the longer you own the unit and the hotter your climate. In a hot Southern climate running the system five to six months per year, the savings from a higher-efficiency unit can offset its price premium within several years.
What is the most common repair this Goodman unit is likely to need, and what does it cost?
The dual-run capacitor is the most frequently reported failure point across Goodman equipment. It is also one of the simpler repairs, typically ranging from 300 to 600 dollars including labor when handled by a technician. Evaporator coil leaks are a more serious and expensive failure that appears in a meaningful share of owner reviews, so keeping up with annual maintenance checks can help catch refrigerant issues early.
Does the multiposition design mean I can install this unit indoors?
Package units are designed to be installed entirely outdoors, either at ground level on a concrete pad or on a rooftop curb. The multiposition feature refers to the direction the supply and return air ducts connect to the cabinet, either through the bottom or the side, not to the location of the unit itself. Your installer will determine which orientation suits your duct layout.
Specifications
| Cooling capacity | 4 Ton |
| Efficiency | 13.4 SEER2 |