Goodman Air Conditioning And Heating – 2 Ton 15.2 SEER2 AC With 60000 BTU 96% AFUE Two Stage Multi-Speed ECM Gas Furnace System – Upflow | R32
Check current price on AC Direct →
Key features
- 2-ton AC rated at 15.2 SEER2, meeting current federal efficiency minimums for most U.S. climate zones
- 60,000 BTU two-stage gas furnace with 96% AFUE for high-efficiency heating with reduced short-cycling
- Multi-speed ECM blower motor lowers electricity consumption and reduces noise at partial-load speeds
- R-32 refrigerant with lower global warming potential than R-410A, positioned for long-term parts availability
- Upflow configuration designed for installations where the air handler sits below the living space
- Dual-fuel compatible staging allows lower heating-stage operation on mild days, improving comfort and runtime efficiency
About this system
This Goodman bundle pairs a 2-ton, 15.2 SEER2 central air conditioner with a 60,000 BTU, 96% AFUE two-stage gas furnace in an upflow configuration, making it a practical choice for smaller homes, condos, or finished basements where heating loads are modest and the air handler sits on the ground floor blowing conditioned air upward. The R-32 refrigerant is a meaningful step forward: it carries a lower global warming potential than R-410A and is becoming the new baseline for residential equipment, so parts and refrigerant availability should remain strong through the system’s service life.
The 15.2 SEER2 rating clears the federal minimums for most U.S. regions but sits at the entry level of the efficiency tier rather than mid- or high-efficiency territory. Expect modest energy savings compared to older R-22 or low-SEER equipment, but do not expect the operating-cost reductions that a 17 or 18 SEER2 system delivers. The two-stage furnace and multi-speed ECM blower motor are genuine upgrades over single-stage equipment: two stages let the furnace run at a lower fire on mild days, reducing temperature swings and short-cycling, while the ECM motor uses significantly less electricity than a standard PSC motor and runs quietly at lower speeds during shoulder seasons.
Goodman positions this system as a value purchase, priced roughly 15 to 25 percent below comparable Trane, Lennox, and Carrier packages. That gap is real money at the point of sale, and for a buyer who maintains the system consistently and uses a skilled installer, the performance gap versus premium brands is narrower than the price gap suggests. The trade-off is a compressor lifespan that typically averages 10 to 14 years versus 15 to 20 for premium brands, and a brand reputation that reflects a higher volume of post-warranty repair calls.
This Goodman bundle offers a legitimate two-stage, high-AFUE heating system with a modern refrigerant at a price point that meaningfully undercuts premium brands. The specs are honest and the technology is sound, but buyers should budget for potential capacitor and coil repairs after year seven and should treat installation quality as non-negotiable since Goodman's longevity is heavily dependent on how well the system is set up.
Overall score is the average of the five ratings above.
What we like
- Priced 15 to 25 percent below comparable Carrier, Trane, and Lennox packages, leaving room in the budget for a quality install
- Two-stage furnace reduces temperature swings and short-cycling compared to single-stage heating
- 96% AFUE is among the highest efficiency tiers available for gas furnaces, keeping heating bills down
- ECM blower motor cuts fan electricity use compared to standard PSC motors and runs more quietly at lower speeds
- R-32 refrigerant is a forward-looking choice with lower environmental impact and expected long-term parts availability
Trade-offs
- Compressor lifespan averages 10 to 14 years versus 15 to 20 for premium-brand compressors, meaning mid-life replacement is a realistic scenario
- Dual-run capacitors are the most commonly reported failure point, typically surfacing as a recurring maintenance cost after the initial years
- Evaporator coil leaks appear in a meaningful share of owner reviews and can be expensive to address once the unit is out of warranty
- A minority of owners report refrigerant charge issues within the first year, underscoring that installer selection is critical with this brand
What homeowners and pros say about Goodman
Goodman carries a split reputation that shows up clearly in the numbers. On ConsumerAffairs, the brand sits at roughly 2.5 out of 5, a score shaped by a channel that attracts frustrated owners more than satisfied ones, and the recurring theme in those complaints is repair costs climbing after year seven or so. Google dealer reviews tell a somewhat different story, averaging around 3.8 out of 5 across hundreds of reviews per location, where affordability is consistently the most praised quality. For this particular two-stage, upflow system, that tension plays out in a familiar way: buyers who got a careful install from a thorough contractor tend to report years of reliable service, while those who went with the lowest-bid installer are more likely to end up in that post-warranty repair cycle the ConsumerAffairs data reflects.
The failure modes that come up most in owner accounts are not unique to this model but are worth knowing going in. Dual-run capacitors are the most frequently reported breakdown, generally a straightforward and relatively affordable repair in the 300 to 600 dollar range, but one that tends to repeat if the unit runs in high heat or dust conditions without regular maintenance. Evaporator coil leaks appear in a meaningful share of reviews and are more disruptive and expensive to address. Compressor longevity is the longer-term concern: Goodman compressors tend to average 10 to 14 years in real-world use, compared to 15 to 20 for premium brands, which means a buyer in their 30s or 40s should factor in a likely compressor or full-system replacement before retirement age. For the two-stage furnace side of this bundle, the 96% AFUE rating and ECM motor are legitimate and not inflated, and the furnace component generally draws fewer complaints than the AC side of Goodman’s lineup.
Sources: ConsumerAffairs Goodman owner reviews, AHRI Directory of Certified Product Performance, U.S. DOE appliance and equipment efficiency standards, Goodman product specification sheets.
What it costs to run
At 15.2 SEER2, cooling this 2-ton system for a typical 1200-hour cooling season at the U.S. average electricity rate of $0.17/kWh works out to roughly $322 per year in cooling, about $43 less per year than a minimum-efficiency 13.4 SEER2 unit of the same size. Your real cost depends on your climate and local rate.
Method: (24,000 BTU/hr ÷ 15.2 SEER2) × 1200 hours ÷ 1000 × $0.17/kWh. Rate source: U.S. EIA average; cooling hours: moderate-climate estimate.
How it compares
| Brand | Comparable model | SEER2 | Stage | Price position |
|---|---|---|---|---|
| Goodman | 2-Ton 15.2 SEER2 AC + 96% AFUE Two-Stage ECM Gas Furnace (this system) | 15.2 | Two-stage | Value pick |
| Carrier | Comfort 24ACC6 AC + 59SC5 Gas Furnace series | 15-16 | Single-stage | Typically 15 to 25 percent more than this Goodman bundle |
| Trane | XR15 AC + S9X1 Gas Furnace series | 15-16 | Single-stage | Typically 15 to 25 percent more than this Goodman bundle |
| Lennox | Merit 14ACX AC + ML196E Gas Furnace series | 15-16 | Single-stage | Typically 15 to 25 percent more than this Goodman bundle |
Competitor rows are comparable single-stage units at similar efficiency; price is relative position, not a quote.
Questions about this system
Is R-32 refrigerant harder or more expensive to service than R-410A in my area?
R-32 is increasingly available through HVAC distributors and is being adopted broadly across the industry, so it should not be significantly harder to source than R-410A. However, technicians must be certified to handle it and it is mildly flammable, so confirm your local service contractors are familiar with it before committing to this system.
What does the two-stage furnace actually do differently from a standard single-stage furnace?
A two-stage furnace fires at a lower output level on mild days and only ramps to full capacity when temperatures drop significantly. This means fewer on-off cycles, more even heat distribution throughout the home, and reduced wear on the heat exchanger over time compared to a unit that always fires at full blast.
How important is it to use a certified installer, and what should I look for?
With Goodman specifically, installation quality is the single most cited factor in how long the system lasts and how efficiently it runs. Look for a contractor who performs a Manual J load calculation before sizing the system, pressure-tests the refrigerant circuit after installation, and verifies the static pressure and airflow are within spec for the ECM motor.
What are the most likely repair costs I should plan for over the first ten years?
The dual-run capacitor is the most commonly reported failure on Goodman AC units, and replacement typically runs between 300 and 600 dollars including labor. Evaporator coil leaks are a documented concern in a meaningful share of owner reviews and can cost considerably more, so maintaining the manufacturer warranty by registering the product and keeping service records is worth doing from day one.
Is a 2-ton, 60,000 BTU combination the right size for my home?
A 2-ton AC is generally sized for roughly 800 to 1,200 square feet of conditioned space, depending on insulation, climate, and ceiling height, while 60,000 BTU of heating capacity suits similarly sized homes in moderate to cold climates. These are rough guidelines only: a licensed contractor performing a Manual J load calculation is the only reliable way to confirm whether this combination is sized correctly for your specific home.
Specifications
| Cooling capacity | 2 Ton |
| Efficiency | 15.2 SEER2 |
| Furnace output | 60000 BTU |
| Furnace efficiency | 96% AFUE |
| Configuration | Upflow |
| Refrigerant | R-32 |