Goodman Furnace And Air Conditioner 2.5 Ton 15.2 SEER2 AC With 60000 BTU 80% AFUE Multi-Speed ECM Gas Furnace System – Upflow | R32
Check current price on AC Direct →
Key features
- 2.5-ton cooling capacity with 15.2 SEER2 rating, meeting current federal efficiency minimums
- 60,000 BTU gas furnace at 80% AFUE with multi-speed ECM blower motor
- Upflow configuration for basement or closet installations with overhead ductwork
- R-32 refrigerant, a lower global-warming-potential replacement for R-410A
- ECM blower reduces fan electricity use compared to standard PSC motors
- Factory-matched system designed to be installed as a complete, warranty-eligible bundle
About this system
This Goodman bundle pairs a 2.5-ton, 15.2 SEER2 air conditioner with a 60,000 BTU, 80% AFUE multi-speed ECM gas furnace in an upflow configuration. The 2.5-ton capacity is a common fit for homes in the 1,200 to 1,600 square-foot range, though your actual load depends on insulation, ceiling height, and climate zone. At 15.2 SEER2, the cooling side clears the federal minimum efficiency threshold for most regions without reaching the higher-efficiency tier, which keeps the upfront price accessible but means operating costs will run modestly higher than a 17 or 18 SEER2 system over time.
The furnace brings two notable upgrades over base-level equipment: an ECM (electronically commutated motor) blower and multi-speed operation. An ECM blower draws significantly less electricity than a standard PSC motor, improving comfort and lowering fan-running costs. The 80% AFUE rating means one-fifth of the fuel energy exits as exhaust, which is adequate but not competitive with 95 to 96% AFUE condensing furnaces if heating bills are a major concern. This system uses R-32 refrigerant, a lower global-warming-potential option compared to the older R-410A it replaces, and one that newer-generation equipment is broadly adopting. The upflow configuration suits homes where the furnace sits in a basement or on a first-floor utility closet with ductwork running upward.
This bundle is aimed at budget-conscious homeowners who want a functional, code-compliant system without paying premium-brand prices. It suits replacement projects in mild-to-moderate climates where extremely high efficiency gear has a longer payback window, and it works well for rental properties or situations where first cost matters more than long-term operating savings.
This Goodman bundle delivers adequate efficiency and a real ECM upgrade at a price point that is noticeably lower than comparable Carrier, Trane, or Lennox equipment. The trade-off is a brand track record that includes documented capacitor failures, evaporator coil leak reports, and compressor longevity that tends to lag premium competitors. Whether that trade-off makes sense depends heavily on the quality of your installing contractor.
Overall score is the average of the five ratings above.
What we like
- Price runs roughly 15 to 25 percent below comparable equipment from Carrier, Trane, or Lennox
- ECM multi-speed blower improves comfort and lowers fan operating costs versus PSC-motor furnaces
- R-32 refrigerant offers lower environmental impact than R-410A
- 15.2 SEER2 meets current federal minimums and is sufficient for moderate climates with reasonable utility rates
- Factory-matched bundle simplifies equipment selection and supports warranty coverage
Trade-offs
- 80% AFUE loses a meaningful share of fuel energy as exhaust; a condensing furnace would cut heating bills noticeably in colder climates
- Dual-run capacitor failures are the most commonly reported service issue, typically appearing as the system ages
- Evaporator coil leaks show up in a notable share of owner reports, a potential mid-life repair cost
- Compressor lifespan averages 10 to 14 years versus 15 to 20 years for premium-brand compressors, meaning replacement may come sooner
What homeowners and pros say about Goodman
Homeowners who choose this Goodman bundle most often point to the upfront price as the deciding factor, and that lines up with Google dealer reviews averaging around 3.8 out of 5, where affordability is the most frequently mentioned positive. Satisfaction tends to be higher in the first several years, and the ECM blower draws specific praise from owners who notice quieter operation and more consistent temperatures compared to older equipment they replaced. The picture shifts on complaint-focused channels: Goodman’s ConsumerAffairs score sits at roughly 2.5 out of 5, and the recurring theme there is repair costs accumulating after roughly year 7. The documented failure modes that come up most often are dual-run capacitor failures (typically a straightforward repair in the 300 to 600 dollar range), evaporator coil leaks showing up in a meaningful share of reviews, and compressor longevity that averages 10 to 14 years rather than the 15 to 20 years owners of Trane or Carrier equipment tend to report.
HVAC technicians have a nuanced view of Goodman. Many install it regularly because the price point opens jobs that would otherwise go unfilled, and parts availability is generally good. The professional caution centers on two things: first, that performance leans heavily on a correct install, proper refrigerant charge, and adequate airflow, leaving less margin for error than premium-tier equipment; and second, that the R-32 refrigerant in this generation requires a technician who has updated their tools and training, since improper handling is linked to early refrigerant leak reports. Pros who emphasize a thorough startup checklist and a quality coil inspection during installation tend to report better long-term outcomes with Goodman equipment than those who treat it as a quick swap job.
Sources: ConsumerAffairs Goodman owner reviews, AHRI Directory of Certified Product Performance, U.S. DOE appliance and equipment efficiency standards, Goodman product specification sheets.
What it costs to run
At 15.2 SEER2, cooling this 2.5-ton system for a typical 1200-hour cooling season at the U.S. average electricity rate of $0.17/kWh works out to roughly $403 per year in cooling, about $54 less per year than a minimum-efficiency 13.4 SEER2 unit of the same size. Your real cost depends on your climate and local rate.
Method: (30,000 BTU/hr ÷ 15.2 SEER2) × 1200 hours ÷ 1000 × $0.17/kWh. Rate source: U.S. EIA average; cooling hours: moderate-climate estimate.
How it compares
| Brand | Comparable model | SEER2 | Stage | Price position |
|---|---|---|---|---|
| Goodman | This system (2.5T 15.2 SEER2 / 60K BTU 80% AFUE ECM) | 15.2 | Single-stage / Multi-speed | Value pick |
| Carrier | Comfort Series (24ACC6 + 58TP) | 15.2 | Single-stage | Typically 15 to 25 percent more than Goodman |
| Trane | XR15 + XB80 | 15.2 | Single-stage | Typically 15 to 25 percent more than Goodman |
| Lennox | Merit Series (14ACX + ML180) | 15.2 | Single-stage | Typically 15 to 25 percent more than Goodman |
Competitor rows are comparable single-stage units at similar efficiency; price is relative position, not a quote.
Questions about this system
Is 15.2 SEER2 efficient enough to get a federal tax credit?
For central air conditioners, the federal Energy Efficient Home Improvement Credit (25C) currently requires a minimum of 16 SEER2 for split systems in most regions. This unit at 15.2 SEER2 does not meet that threshold, so you would not qualify for the AC portion of that credit. Check with a tax professional and verify current IRS guidance before purchasing based on incentive eligibility.
Why does Goodman show low ratings on review sites if it sells so many units?
Goodman's ConsumerAffairs score sits around 2.5 out of 5, but that platform attracts complaint-driven traffic, meaning satisfied owners rarely post. Google dealer reviews average closer to 3.8 out of 5, and the most common praise there is affordability. The documented failure points, particularly dual-run capacitors and evaporator coil leaks, are real but often manageable with routine maintenance and a good service contractor.
What does the ECM blower actually do for me compared to a standard furnace?
An ECM (electronically commutated motor) adjusts its speed to match airflow demand rather than running at a fixed high speed, which cuts blower electricity consumption significantly. You also tend to get more even temperatures throughout the house and quieter operation at lower speeds. It is one of the stronger practical upgrades in this bundle compared to a base-model single-speed furnace.
The specs mention R-32 refrigerant. Will that cause any service problems?
R-32 is increasingly common in new equipment and is handled safely by technicians trained on it, but not every local HVAC contractor has updated their equipment and certifications yet. Before buying, confirm your installer is comfortable working with R-32, since improper handling or charging is one documented source of early refrigerant leak reports on newer systems.
How important is installer quality with a Goodman system specifically?
Technicians who work on Goodman equipment consistently point to installation quality as the single biggest factor in how long the system lasts and how many service calls it generates. This is true of any brand, but it matters particularly here because the equipment's price advantage can be quickly erased by a poor startup charge, undersized refrigerant lines, or improper airflow setup. Hiring a licensed, experienced contractor and verifying the startup checklist is not optional with this brand.
Specifications
| Cooling capacity | 2.5 Ton |
| Efficiency | 15.2 SEER2 |
| Furnace output | 60000 BTU |
| Furnace efficiency | 80% AFUE |
| Configuration | Upflow |
| Refrigerant | R-32 |