Goodman Furnace And Air Conditioner 2.5 Ton 15.2 SEER2 AC With 60000 BTU 96% AFUE Multi-Speed ECM Gas Furnace System – Upflow | R32
Check current price on AC Direct →
Key features
- 2.5-ton cooling capacity rated at 15.2 SEER2, meeting current federal efficiency standards
- 60,000 BTU gas furnace with 96% AFUE high-efficiency heat exchanger
- Multi-speed ECM blower motor reduces electricity use and improves temperature consistency
- R-32 refrigerant with lower global warming potential than R-410A
- Upflow configuration designed for basement or closet installations with overhead duct systems
- Matched system bundle simplifies permitting and ensures rated efficiency when properly installed
About this system
This Goodman bundle pairs a 2.5-ton, 15.2 SEER2 central air conditioner with a 60,000 BTU, 96% AFUE multi-speed ECM gas furnace in an upflow configuration, making it a practical choice for homes in the 1,100 to 1,600 square foot range that need both heating and cooling replaced at the same time. The R-32 refrigerant is a meaningful upgrade over older R-410A systems: it has a lower global warming potential and requires a smaller refrigerant charge to do the same work, which can also mean slightly lower material costs if a service call ever requires a top-off. The upflow layout suits the most common installation scenario in North American homes, where the air handler sits in a basement or utility closet and conditioned air rises through overhead ductwork.
The 96% AFUE rating means the furnace converts 96 cents of every dollar of gas into usable heat, putting it firmly in the high-efficiency tier and qualifying it for utility rebates in many markets. The multi-speed ECM blower motor runs at lower speeds during mild conditions, which reduces electricity consumption and helps maintain steadier indoor temperatures compared to a single-speed unit. At 15.2 SEER2, the air conditioner sits just above the federal minimums that took effect in 2023, so it is efficient enough for most budgets without crossing into the premium-price territory of 17 SEER2 and above systems. This is not a variable-speed or two-stage system, so expect some on-off cycling and modest humidity control rather than the near-continuous low-speed operation of higher-tier equipment.
This Goodman bundle offers solid specs at a price point that is genuinely 15 to 25 percent below comparable Carrier, Trane, and Lennox systems, and the 96% AFUE furnace and R-32 refrigerant are legitimate technical strengths. The trade-off is a brand track record that shows more out-of-warranty repair frequency than premium competitors, particularly after year seven, and long-term performance that is heavily dependent on the quality of the installing contractor. For budget-conscious homeowners who vet their installer carefully and set aside a modest repair fund, this system represents reasonable value.
Overall score is the average of the five ratings above.
What we like
- Purchase price runs 15 to 25 percent below Carrier, Trane, and Lennox at similar efficiency ratings
- 96% AFUE furnace qualifies for utility rebates in many states and meaningfully reduces heating bills
- R-32 refrigerant is more environmentally responsible and requires a smaller charge than R-410A
- Multi-speed ECM motor improves comfort and lowers blower electricity costs versus single-speed alternatives
- Matched bundle simplifies sizing, permitting, and coil compatibility verification
Trade-offs
- Dual-run capacitors are the most frequently reported failure, typically requiring a 300 to 600 dollar service call
- Evaporator coil leaks appear in a meaningful share of owner reports, which can be a costly mid-life repair
- Compressor lifespan averages 10 to 14 years versus 15 to 20 years cited for premium-brand equipment
- Single-stage compressor means the system runs at full capacity or not at all, limiting humidity control compared to two-stage or variable-speed options
What homeowners and pros say about Goodman
Homeowners who post about Goodman online tend to split into two camps, and that divide is clearly visible in the brand’s ratings: a ConsumerAffairs score of roughly 2.5 out of 5 (a channel that skews heavily toward people with complaints) versus Google dealer review averages around 3.8 out of 5 across hundreds of location-level reviews where affordability comes up as the most consistent praise. For this specific 2.5-ton, 96% AFUE bundle, the owners most likely to be satisfied are those who researched their contractor as carefully as they researched the equipment, since HVAC professionals consistently point to installation quality as the single largest variable in how long a Goodman system performs. An improperly charged R-32 system or a rushed refrigerant line set is where early-year refrigerant leak complaints typically originate, and those complaints show up in Goodman’s owner record.
On the mechanical side, HVAC technicians who service Goodman equipment regularly cite dual-run capacitor failures as the brand’s most predictable wear item, a repair that is inexpensive in parts but still costs 300 to 600 dollars once a truck rolls. Evaporator coil leaks appear in a meaningful portion of longer-term owner reviews, and the compressor lifespan data points to an average of 10 to 14 years rather than the 15 to 20 years some premium-brand owners report. For this particular system, the 96% AFUE furnace and the multi-speed ECM blower are genuine strengths that deliver real operating cost savings, and the R-32 refrigerant is a forward-looking choice. The honest takeaway from the service community is that Goodman builds a functional, code-compliant product that rewards buyers who budget for periodic maintenance and choose a skilled installer, while punishing those who treat the lower sticker price as a reason to cut corners on everything else in the project.
Sources: ConsumerAffairs Goodman owner reviews, AHRI Directory of Certified Product Performance, U.S. DOE appliance and equipment efficiency standards, Goodman product specification sheets.
What it costs to run
At 15.2 SEER2, cooling this 2.5-ton system for a typical 1200-hour cooling season at the U.S. average electricity rate of $0.17/kWh works out to roughly $403 per year in cooling, about $54 less per year than a minimum-efficiency 13.4 SEER2 unit of the same size. Your real cost depends on your climate and local rate.
Method: (30,000 BTU/hr ÷ 15.2 SEER2) × 1200 hours ÷ 1000 × $0.17/kWh. Rate source: U.S. EIA average; cooling hours: moderate-climate estimate.
How it compares
| Brand | Comparable model | SEER2 | Stage | Price position |
|---|---|---|---|---|
| Goodman | GSXH502410 + GMVC960603BN (this system) | 15.2 | Single-stage AC / Multi-speed furnace | Value pick |
| Carrier | Comfort 15 Series (24ACC636) | 15.2 | Single-stage | Typically 15 to 25 percent more than this Goodman bundle |
| Trane | XR15 Series (4TTR5030) | 15.2 | Single-stage | Typically 15 to 25 percent more than this Goodman bundle |
| Lennox | Merit 14ACX Series | 15.0-15.2 | Single-stage | Typically 15 to 25 percent more than this Goodman bundle |
Competitor rows are comparable single-stage units at similar efficiency; price is relative position, not a quote.
Questions about this system
Does the R-32 refrigerant in this system require any special handling that my local HVAC tech might not be set up for?
R-32 is mildly flammable (A2L classification) and requires technicians to use tools and recovery equipment rated for A2L refrigerants. Most licensed HVAC contractors in the U.S. are already transitioning their equipment, but it is worth confirming before you book the install, since not every older shop has made the switch yet.
The Goodman warranty says 10 years on parts, but I have seen complaints about repair costs after year seven. How do I reconcile that?
The 10-year parts warranty (which requires registration within 60 days of install) covers the cost of the failed component itself, not the labor to diagnose and replace it. Labor on a capacitor or coil job can run several hundred dollars or more, and those costs are entirely out of pocket regardless of warranty status. The ConsumerAffairs complaint pattern after year seven typically reflects labor and diagnostic bills, not parts being denied.
Is 2.5 tons the right size for my home, or should I size up to a 3-ton unit?
Tonnage should always be based on a Manual J load calculation that accounts for your square footage, insulation levels, window area, local climate, and duct condition. A general rule of thumb (400 to 600 square feet per ton) is a starting point, not a substitute for the calculation. Installing an oversized unit causes short-cycling, poor humidity removal, and accelerated wear, so push your contractor to provide the actual load calculation in writing.
What is the most likely repair I will face in the first five years with this system?
Based on Goodman's documented failure patterns, dual-run capacitors are the most commonly reported early and mid-life failure. They are inexpensive parts, but the labor and diagnostic visit typically runs 300 to 600 dollars total. A small percentage of owners also report refrigerant leaks in the first year, which are usually traced to installation or improper charging rather than a manufacturing defect.
Will this furnace and AC system qualify for a federal tax credit or utility rebates?
The 96% AFUE furnace meets the efficiency threshold for the federal 25C energy efficiency tax credit (up to 30 percent of equipment cost, subject to annual caps), and many utilities offer additional rebates for high-efficiency gas furnaces. The 15.2 SEER2 air conditioner sits at the lower edge of typical rebate thresholds, so check your specific utility's current program requirements before assuming the AC portion qualifies.
Specifications
| Cooling capacity | 2.5 Ton |
| Efficiency | 15.2 SEER2 |
| Furnace output | 60000 BTU |
| Furnace efficiency | 96% AFUE |
| Configuration | Upflow |
| Refrigerant | R-32 |