Goodman Furnace And Air Conditioner 2 Ton 14.5 SEER2 AC With 80000 BTU 96% AFUE Multi-Speed ECM Gas Furnace System – Upflow | R32
Check current price on AC Direct →
Key features
- 14.5 SEER2 central air conditioner rated for 2-ton (24,000 BTU/hr) cooling capacity
- 96% AFUE multi-speed ECM gas furnace at 80,000 BTU input, upflow configuration
- R-32 refrigerant: lower global-warming potential than R-410A, increasingly code-compliant
- ECM blower motor provides stepped airflow for quieter, more even air distribution
- Factory-matched system ships as a tested, compatible AC and furnace bundle
- Designed for upflow installation where supply air exits the top of the cabinet
About this system
This Goodman bundle pairs a 2-ton, 14.5 SEER2 central air conditioner with an 80,000 BTU, 96% AFUE multi-speed ECM gas furnace in an upflow configuration, making it a complete heating and cooling replacement for homes roughly 900 to 1,300 square feet depending on climate, insulation, and ceiling height. The 96% AFUE rating means only about four cents of every dollar spent on gas escapes as waste, placing this furnace solidly in the high-efficiency tier without the added cost or complexity of a condensing modulating unit. The air conditioner ships pre-charged for R-32 refrigerant, a lower global-warming-potential option that is becoming the new industry standard as R-410A is phased out.
The multi-speed ECM blower motor is a meaningful upgrade over a simple single-speed motor: it ramps airflow up and down in steps rather than running full-blast all the time, which translates to quieter operation, more even temperature distribution, and modest energy savings on the air-handling side. At 14.5 SEER2, the AC meets current federal minimum efficiency standards for most U.S. climate regions, so it will not qualify for the federal energy-efficiency tax credit on its own, but the high-AFUE furnace may contribute toward that calculation depending on your tax situation. This bundle is best suited for budget-conscious homeowners who need a reliable, code-compliant replacement and are willing to invest in a quality installation rather than premium brand recognition.
This Goodman bundle delivers solid, code-compliant heating and cooling at a price point that is hard to argue with for a straightforward replacement job. The 96% AFUE furnace and ECM motor represent genuinely useful technology, but long-term satisfaction will hinge heavily on installation quality and whether you budget for periodic maintenance. Owners who treat the capacitor and coil as consumables and keep up with professional tune-ups typically get reasonable service life; those who expect set-it-and-forget-it performance may be disappointed after year seven.
Overall score is the average of the five ratings above.
What we like
- Price runs 15 to 25 percent below comparable Trane, Lennox, and Carrier systems, freeing budget for quality installation
- 96% AFUE furnace is among the most efficient you can buy without stepping up to modulating equipment
- ECM multi-speed motor reduces blower noise and improves comfort versus single-speed alternatives
- R-32 refrigerant pre-charge keeps the system compatible with tightening environmental regulations
- Factory-matched bundle removes guesswork around coil and condenser compatibility
Trade-offs
- Dual-run capacitors are the most frequently reported failure point, typically requiring a 300 to 600 dollar service call
- Evaporator coil leaks appear in a meaningful share of owner reviews, an issue that can escalate repair costs significantly
- Compressor longevity averages 10 to 14 years versus 15 to 20 years for premium-brand compressors, affecting long-term cost of ownership
- A minority of owners report refrigerant leaks within the first year, usually traced to installation or initial charge issues rather than the equipment itself
What homeowners and pros say about Goodman
Homeowners who track their experiences online give Goodman a split verdict that maps closely to this specific bundle. On ConsumerAffairs, where scores skew toward frustrated owners, Goodman lands around 2.5 out of 5, and the recurring complaint is repair costs that begin stacking up after roughly year seven. On Google dealer reviews, where the audience includes satisfied customers who had professional installations done, scores average around 3.8 out of 5, with affordability cited most often as the reason buyers chose the brand. For this system in particular, the documented weak points are consistent with the broader Goodman ownership picture: dual-run capacitors are the most commonly reported failure, usually a 300 to 600 dollar fix when caught promptly; evaporator coil leaks show up in a meaningful share of owner accounts and can be more costly to address; and compressors on Goodman equipment tend to average 10 to 14 years in service, shorter than the 15 to 20 years owners of Trane, Carrier, or Lennox compressors often report. A minority of owners also report refrigerant leaks within the first year, a pattern technicians consistently attribute to installation or charging errors rather than the equipment leaving the factory defective.
HVAC technicians who work on Goodman equipment regularly tend to say the same thing: the brand performs reasonably well when it is installed carefully and serviced on schedule, and it struggles when either of those conditions is missing. The ECM multi-speed blower in this furnace is genuinely well-regarded among installers for its ability to deliver more even airflow than a basic single-speed unit, and the 96% AFUE rating is not marketing shorthand, it reflects real combustion efficiency. The R-32 refrigerant charge is forward-looking and unlikely to create service headaches as A2L handling becomes standard practice. The consensus from both owners and technicians is that this bundle represents honest value for the price, provided the buyer budgets for a quality installation and treats the capacitor and annual tune-up as routine operating costs rather than optional extras.
Sources: ConsumerAffairs Goodman owner reviews, AHRI Directory of Certified Product Performance, U.S. DOE appliance and equipment efficiency standards, Goodman product specification sheets.
What it costs to run
At 14.5 SEER2, cooling this 2-ton system for a typical 1200-hour cooling season at the U.S. average electricity rate of $0.17/kWh works out to roughly $338 per year in cooling, about $27 less per year than a minimum-efficiency 13.4 SEER2 unit of the same size. Your real cost depends on your climate and local rate.
Method: (24,000 BTU/hr ÷ 14.5 SEER2) × 1200 hours ÷ 1000 × $0.17/kWh. Rate source: U.S. EIA average; cooling hours: moderate-climate estimate.
How it compares
| Brand | Comparable model | SEER2 | Stage | Price position |
|---|---|---|---|---|
| Goodman | GSX/GMVC96 Bundle (this system) | 14.5 | Single-stage AC / Multi-speed furnace | Value pick |
| Carrier | Comfort 24ACC4 / 59SC5 Bundle | 14.5 | Single-stage AC / Single-stage furnace | Typically 15 to 25 percent more than Goodman |
| Trane | XR14 / S9X1 Bundle | 14.5 | Single-stage AC / Single-stage furnace | Typically 15 to 25 percent more than Goodman |
| Lennox | Merit ML14XC1 / ML196E Bundle | 14.5 | Single-stage AC / Multi-speed furnace | Typically 15 to 25 percent more than Goodman |
Competitor rows are comparable single-stage units at similar efficiency; price is relative position, not a quote.
Questions about this system
Will this 2-ton, 80,000 BTU bundle be sized right for my home?
Sizing depends on your local climate, insulation levels, window area, and ceiling height, not square footage alone. A licensed HVAC contractor should perform a Manual J load calculation before you purchase. Undersizing causes constant run times; oversizing causes short-cycling and humidity problems, either of which shortens equipment life.
R-32 is new to me. Is it harder to service or more dangerous than R-410A?
R-32 is mildly flammable (A2L classification), which means technicians need to follow updated handling procedures, but it is not exotic. Most EPA-certified HVAC technicians are already trained or in the process of being trained for A2L refrigerants. Availability is growing rapidly as manufacturers shift away from R-410A, so finding service refrigerant should not be a problem.
What does the Goodman warranty actually cover, and for how long?
Goodman typically offers a 10-year parts warranty when the system is registered within 60 days of installation by a licensed contractor, dropping to a shorter term for unregistered units. The warranty covers parts but not labor, refrigerant, or diagnostic fees, so a repair after year two still carries real out-of-pocket cost. Confirm current warranty terms on Goodman's website at the time of purchase, as terms can change.
How often does the capacitor actually fail, and what does it cost to fix?
Dual-run capacitor failure is the single most commonly reported repair on Goodman condensing units, and it can happen anywhere from year three onward. The good news is it is usually a straightforward fix: parts and labor typically run 300 to 600 dollars, and a competent technician can complete the job in under an hour. Keeping a preventive maintenance contract that includes capacitor checks each spring can catch a weakening capacitor before it fails mid-summer.
Can I install this system myself to save money on labor?
In most jurisdictions, HVAC installation requires a licensed contractor, and connecting a gas furnace involves gas line work and flue venting that carries real safety risk if done incorrectly. Beyond legality, Goodman's 10-year parts warranty typically requires professional installation. A significant share of first-year refrigerant leaks reported by Goodman owners are traced to improper installation or charge, so cutting corners here is likely to cost more over time than the labor savings.
Specifications
| Cooling capacity | 2 Ton |
| Efficiency | 14.5 SEER2 |
| Furnace output | 80000 BTU |
| Furnace efficiency | 96% AFUE |
| Configuration | Upflow |
| Refrigerant | R-32 |