Goodman R32 5 Ton 13.6 SEER2 120000 BTU 80% Multi-Speed ECM Gas Furnace and Air Conditioner System – Upflow
Check current price on AC Direct →
Key features
- 5-ton / 60,000 BTU cooling capacity for larger homes
- 13.6 SEER2 efficiency rating, meeting current federal minimum standards
- R-32 refrigerant with lower global-warming potential than R-410A
- 120,000 BTU 80% AFUE multi-speed ECM gas furnace, upflow configuration
- ECM blower motor reduces electricity use and improves airflow consistency
- Priced approximately 15 to 25 percent below comparable Trane, Carrier, and Lennox systems
About this system
This Goodman package pairs a 5-ton R-32 condensing unit rated at 13.6 SEER2 with a 120,000 BTU 80% AFUE multi-speed ECM gas furnace in an upflow configuration. At 5 tons it is sized for larger homes, typically in the 2,400 to 3,000 square foot range depending on climate zone, insulation, and window load. The R-32 refrigerant is a lower global-warming-potential alternative to R-410A and is increasingly common in new equipment as the industry moves away from older refrigerants. The 80% AFUE rating means 80 cents of every heating dollar goes to usable heat, which is acceptable for mild to moderate climates but falls short of the 95%+ condensing furnaces available if gas savings are a priority.
The multi-speed ECM blower motor is a meaningful upgrade over a single-speed PSC motor. It ramps airflow to match demand, which reduces temperature swings, lowers blower electricity consumption, and moves more air quietly at lower speeds. That said, 13.6 SEER2 sits at the entry tier of current efficiency standards, just clearing the federal minimum for most U.S. regions, so long-run cooling costs will be higher than a 16+ SEER2 system. This system suits buyers who need a large-capacity upflow unit, want to avoid the premium pricing of Trane, Carrier, or Lennox, and are working with a budget-conscious new construction or replacement project where upfront cost matters more than long-term energy optimization.
This Goodman system delivers a workable large-capacity heating and cooling solution at a price point that clearly undercuts the major premium brands. The ECM motor and R-32 refrigerant add real value at this price, but 13.6 SEER2 and 80% AFUE are entry-level specs, and Goodman's documented track record of capacitor failures, evaporator coil leaks, and compressor longevity that trails premium brands means total cost of ownership over 15 years is less favorable than the purchase price alone suggests.
Overall score is the average of the five ratings above.
What we like
- Substantially lower purchase price than Trane, Carrier, or Lennox equivalents
- Multi-speed ECM blower improves comfort and lowers blower motor operating costs vs. single-speed alternatives
- R-32 refrigerant is better positioned for long-term regulatory compliance than R-410A equipment
- 5-ton capacity covers large homes that many smaller-capacity systems cannot serve
- Wide dealer and parts availability keeps service logistics straightforward in most markets
Trade-offs
- 13.6 SEER2 is at the efficiency floor; monthly cooling costs will be noticeably higher than 16+ SEER2 systems over the life of the equipment
- 80% AFUE furnace wastes 20% of fuel, which adds up in colder climates or homes with high heating loads
- Goodman compressors average 10 to 14 years of service life versus 15 to 20 years typical of premium brands, meaning replacement may come sooner
- Documented owner complaints include dual-run capacitor failures, evaporator coil leaks, and a minority of early refrigerant leaks that are often tied to install quality
What homeowners and pros say about Goodman
Goodman earns a split verdict from the people who own and service its equipment. On Google dealer reviews, the brand averages around 3.8 out of 5, and the most consistent praise is straightforward: the systems cost less to buy and parts are easy to find. HVAC technicians generally confirm that a properly installed Goodman unit runs without drama in its early years, and that most problems they see are traceable to a rushed or incorrect installation rather than a factory defect. That makes installer selection the single most consequential decision a buyer of this system will make.
The less favorable picture emerges at the ConsumerAffairs level, where Goodman scores roughly 2.5 out of 5 on a channel that skews heavily toward owners who experienced problems. The recurring complaints center on repair costs rising after about year seven of ownership. The documented failure modes match that timeline: dual-run capacitors are the most frequently reported breakdown, typically a 300 to 600 dollar repair and not a catastrophic one, but evaporator coil leaks and refrigerant loss also appear with enough regularity to take seriously. Compressor longevity averaging 10 to 14 years, versus the 15 to 20 years common in premium brands, is the most significant long-term trade-off for a buyer considering a 5-ton system expected to carry a large home for 15 years or more. A small number of owners also report refrigerant leaks in the first year, which professionals attribute primarily to charge errors at installation rather than equipment defects. For a large system like this one, those downstream probabilities are worth weighing honestly against the real and substantial upfront savings Goodman offers.
Sources: ConsumerAffairs Goodman owner reviews, AHRI Directory of Certified Product Performance, U.S. DOE appliance and equipment efficiency standards, Goodman product specification sheets.
What it costs to run
At 13.6 SEER2, cooling this 5-ton system for a typical 1200-hour cooling season at the U.S. average electricity rate of $0.17/kWh works out to roughly $900 per year in cooling, about $13 less per year than a minimum-efficiency 13.4 SEER2 unit of the same size. Your real cost depends on your climate and local rate.
Method: (60,000 BTU/hr ÷ 13.6 SEER2) × 1200 hours ÷ 1000 × $0.17/kWh. Rate source: U.S. EIA average; cooling hours: moderate-climate estimate.
How it compares
| Brand | Comparable model | SEER2 | Stage | Price position |
|---|---|---|---|---|
| Goodman | R-32 5-Ton 13.6 SEER2 80% Multi-Speed ECM System | 13.6 | Multi-speed | Value pick |
| Carrier | Comfort Series (24ACC6) | 13.4 to 14.0 | Single-stage | Typically 15 to 25 percent more than this Goodman system |
| Trane | XR14 Series | 14.0 | Single-stage | Typically 15 to 25 percent more than this Goodman system |
| Lennox | Merit ML14 Series | 13.4 to 14.0 | Single-stage | Typically 15 to 25 percent more than this Goodman system |
Competitor rows are comparable single-stage units at similar efficiency; price is relative position, not a quote.
Questions about this system
Is 13.6 SEER2 enough for a hot-summer climate like Texas or Florida, or will my electric bills be painful?
13.6 SEER2 meets the federal minimum for most regions but is among the least efficient options available. In a hot climate running 2,000 or more cooling hours per year, the difference versus a 16 SEER2 system adds up to a meaningful annual operating cost gap. If energy costs are a priority in a hot climate, stepping up in efficiency tiers is worth pricing out before committing.
What does R-32 refrigerant mean for service and maintenance costs compared to R-410A?
R-32 has a lower global-warming potential than R-410A and is being adopted broadly as R-410A phases down. Most certified HVAC technicians can handle R-32, but you should confirm your service contractor is equipped for it before scheduling work. Refrigerant pricing and availability are comparable to R-410A currently, so near-term service costs should not differ significantly.
How worried should I be about the evaporator coil leak issue Goodman owners report?
Evaporator coil leaks appear in a meaningful share of Goodman owner reviews and tend to show up several years into ownership. Keeping the coil clean, maintaining proper refrigerant charge at installation, and scheduling annual inspections helps catch developing issues early. Because coil replacement on a 5-ton system is a significant repair cost, confirming your warranty registration is complete and understanding what your installer's labor warranty covers is worth doing at the time of purchase.
The furnace is rated 80% AFUE. Should I upgrade to a 96% or higher model instead?
In climates with mild winters and low annual heating hours, the payback period on a higher-efficiency condensing furnace can stretch to 10 years or more, making 80% reasonable. In colder climates where the furnace runs heavily from November through March, a 95%+ AFUE unit will recover its cost premium faster and reduce carbon output. It is worth running a simple payback calculation using your local gas rate and estimated annual heating hours before deciding.
What is actually covered under Goodman's warranty, and how does it compare to Trane or Carrier?
Goodman typically offers a 10-year parts limited warranty when the unit is registered within the required window after installation, covering major components including the compressor, heat exchanger, and coil. Labor is not included, which is standard across the industry including Trane and Carrier at base warranty levels. Goodman's parts warranty terms are broadly comparable to premium brands, but because compressor longevity averages shorter on Goodman equipment, the practical value of that coverage depends on how long your specific unit holds up.
Specifications
| Cooling capacity | 5 Ton |
| Efficiency | 13.6 SEER2 |
| Furnace output | 120000 BTU |
| Configuration | Upflow |
| Refrigerant | R-32 |