Revolv 2.5 Ton Package Unit Cooling Only AC For Mobile Homes | 13.4 SEER2 Horizontal Discharge | R454B (P95RD-030K)
Check current price on AC Direct →
Key features
- 2.5-ton cooling capacity in a self-contained package unit designed for mobile and manufactured homes
- 13.4 SEER2 efficiency rating meets current federal minimum standards
- Horizontal discharge configuration matches standard HUD-code manufactured home ductwork layouts
- R-454B refrigerant complies with current EPA regulations and has a lower global warming potential than R-410A
- Single-cabinet design eliminates the need for a separate indoor air handler or refrigerant line set
- Cooling-only unit intended for climates where a separate heating source is already in place
About this system
The Revolv P95RD-030K is a 2.5-ton cooling-only package unit built specifically for manufactured and mobile homes. Unlike a split system, every mechanical component sits in a single outdoor cabinet that connects directly to the home’s existing ductwork through a horizontal discharge opening, which is the standard configuration found under or alongside most HUD-code homes. There is no indoor air handler to worry about, no refrigerant line set to run through the crawl space, and no separate electrical disconnect inside the structure. That simplicity makes it a practical replacement option when the original packaged unit fails and the homeowner wants a like-for-like swap.
At 13.4 SEER2, this unit meets the current federal minimum efficiency standard for its region and climate zone. That is not a standout efficiency number, but it is honest baseline performance that keeps upfront costs in check. The switch to R-454B refrigerant (a lower-global-warming-potential replacement for R-410A) means the system is ready for current EPA regulations, and parts should remain available for the foreseeable future. The trade-off is that R-454B requires technicians to be certified to handle it and is still less widely stocked than R-410A at smaller shops, so owners in rural areas should confirm local service availability before buying.
The Revolv P95RD-030K is a straightforward, budget-friendly replacement for worn-out package units in manufactured homes, and it does that one job without unnecessary complication. Efficiency sits at the code minimum, so energy bills will reflect that, and Goodman's long-term reliability record introduces some risk past the seven-year mark. Buyers who need an affordable, compatible drop-in and have a reliable local installer will find it reasonable value; those who want premium longevity or the lowest possible utility costs should budget more.
Overall score is the average of the five ratings above.
What we like
- Purpose-built horizontal discharge matches manufactured home ductwork without modifications
- R-454B refrigerant positions the unit for regulatory compliance well into the future
- Lower upfront cost compared to Carrier, Trane, or Lennox equivalents in the same efficiency tier
- Single-cabinet design means simpler installation and fewer potential leak points than a split system
- Dual-run capacitor failures, the most common Goodman service call, are typically low-cost repairs in the $300 to $600 range
Trade-offs
- 13.4 SEER2 is code minimum, not a standout rating, and will produce higher monthly cooling costs than higher-SEER alternatives
- R-454B service availability can be limited at smaller or rural shops, potentially raising future repair costs
- Goodman compressors average 10 to 14 years versus 15 to 20 years for premium-brand compressors, meaning earlier replacement risk
- A minority of owners report refrigerant leaks within the first year, a known quality-control concern that underscores the importance of experienced installation
What homeowners and pros say about Goodman
Homeowners and installers who share feedback about Goodman equipment land in two fairly distinct camps. On complaint-heavy channels like ConsumerAffairs, Goodman scores around 2.5 out of 5, and the recurring story is equipment that runs fine for the first several years before repair costs start climbing around year seven or later. The specific failure modes that show up most often are dual-run capacitor failures (generally a low-cost fix), evaporator coil refrigerant leaks (a more involved repair), and compressor lifespans that average 10 to 14 years rather than the 15 to 20 years owners of premium-brand equipment sometimes see. A smaller but notable group reports refrigerant leaks within the first year, which technicians generally attribute to installation or initial charge issues rather than a manufacturing defect.
On Google dealer review pages, where customers are rating the full experience of buying and having equipment installed, Goodman sits closer to 3.8 out of 5 across several hundred reviews per location, and the most common praise is straightforward: the price was right. HVAC professionals tend to say much the same thing privately. Goodman is not the brand they reach for when a customer wants a 20-year system and never wants to think about it again, but it is a defensible choice when budget is the binding constraint and the installer is experienced enough to do the job correctly. For a manufactured home package unit replacement where the market for high-end equipment is thin and installation access can be awkward, that calculus applies here as much as anywhere.
Sources: ConsumerAffairs Goodman owner reviews, AHRI Directory of Certified Product Performance, U.S. DOE appliance and equipment efficiency standards, Goodman product specification sheets.
What it costs to run
At 13.4 SEER2, cooling this 2.5-ton system for a typical 1200-hour cooling season at the U.S. average electricity rate of $0.17/kWh works out to roughly $457 per year in cooling, about $0 less per year than a minimum-efficiency 13.4 SEER2 unit of the same size. Your real cost depends on your climate and local rate.
Method: (30,000 BTU/hr ÷ 13.4 SEER2) × 1200 hours ÷ 1000 × $0.17/kWh. Rate source: U.S. EIA average; cooling hours: moderate-climate estimate.
How it compares
| Brand | Comparable model | SEER2 | Stage | Price position |
|---|---|---|---|---|
| Revolv (Goodman) | P95RD-030K | 13.4 | Single-stage | Value pick |
| Carrier | WeatherMaster 50XC | 14.0 | Single-stage | Moderately higher than this unit |
| Trane | Precedent 3YCC | 13.4 | Single-stage | Notably higher than this unit |
| Lennox | LRP14GE | 14.0 | Single-stage | Moderately to notably higher than this unit |
Competitor rows are comparable single-stage units at similar efficiency; price is relative position, not a quote.
Questions about this system
Will this unit fit my existing mobile home ductwork without modifications?
The horizontal discharge configuration is the standard layout for most HUD-code manufactured homes, so a like-for-like replacement typically connects to the existing plenum and ductwork without major changes. That said, duct sizing, plenum dimensions, and electrical connections vary by home and original unit, so a technician should verify compatibility before ordering.
Can any HVAC technician service this unit, or do they need special R-454B certification?
R-454B is classified as a mildly flammable (A2L) refrigerant, so technicians must have specific EPA Section 608 certification and the right recovery equipment to legally handle it. R-454B is less universally stocked than R-410A, so in rural areas it is worth calling local shops ahead of time to confirm they carry it and are equipped to work with A2L refrigerants.
This is a cooling-only unit. What do I need for heat?
This package unit provides no heating on its own. It is designed for homes that already have a separate heating system such as a gas furnace, electric furnace, or heat strip. If you need both heating and cooling in one cabinet, you would need to look at a package heat pump or a gas-electric package unit instead.
What is the most likely repair I should budget for over the first 10 years?
Based on Goodman's documented failure pattern, dual-run capacitors are the most commonly reported issue and are typically a straightforward repair costing roughly $300 to $600 including labor. Evaporator coil leaks are a secondary concern reported by a meaningful share of owners and are a more expensive fix. Keeping up with annual maintenance visits helps catch both issues early.
How does 13.4 SEER2 affect my electricity bill compared to an older unit?
Most manufactured homes built before 2010 have original equipment rated between 8 and 10 SEER (older scale), so replacing with a 13.4 SEER2 unit will likely reduce cooling energy consumption meaningfully. However, 13.4 SEER2 is the current code minimum, so if your budget allows a 15 or 16 SEER2 unit, the energy savings over 10 or more years could offset a portion of the higher upfront cost depending on your climate and cooling hours.
Specifications
| Cooling capacity | 2.5 Ton |
| Efficiency | 13.4 SEER2 |
| Configuration | Horizontal |
| Refrigerant | R-454B |