Revolv 5 Ton Package Unit Cooling Only AC For Mobile Homes | 13.4 SEER2 Horizontal Discharge | R454B (P95RD-060K)
Check current price on AC Direct →
Key features
- 5-ton cooling capacity for larger manufactured and mobile homes
- 13.4 SEER2 efficiency rating, meeting current federal minimum standards
- Horizontal discharge configuration designed for under-home installation
- R-454B refrigerant, a lower-GWP alternative to R-410A
- Cooling-only package unit with no heating component included
- All-in-one cabinet replaces existing horizontal package units without a separate air handler
About this system
The Revolv P95RD-060K is a 5-ton, cooling-only package unit built specifically for mobile and manufactured homes. Unlike a split system, all of the mechanical components sit inside one cabinet that installs horizontally beneath the home, connecting directly to the existing ductwork through the floor. That self-contained design eliminates the need for a separate indoor air handler or furnace cabinet, which makes it a straightforward drop-in replacement for owners of single-wide and double-wide homes already running a horizontal-discharge package unit. The Revolv label is a Goodman-built product, meaning it shares the same manufacturing platform and components as standard Goodman residential equipment.
At 13.4 SEER2, this unit meets the current federal minimum efficiency standard for the region and refrigerant type but does not exceed it by a meaningful margin. R-454B is a lower-GWP refrigerant that replaces the older R-410A, so parts and service will align with the newer refrigerant supply chain going forward. For a 5-ton load, this unit is sized for larger manufactured homes, typically in the 2,000 to 2,500 square foot range depending on insulation quality, ceiling height, and climate zone. Buyers should confirm a proper Manual J load calculation before committing to this tonnage, since oversizing a cooling-only package unit in a manufactured home is a common and costly mistake that causes short-cycling and humidity problems.
The Revolv P95RD-060K is a practical, budget-conscious replacement for manufactured homeowners who need a large-tonnage cooling-only unit and want to keep costs down. It delivers baseline efficiency and a straightforward installation path, but buyers should budget realistically for potential mid-life repairs and should not expect the component longevity of premium brands. The value proposition is real, but it comes with trade-offs in long-term reliability that are worth weighing before purchase.
Overall score is the average of the five ratings above.
What we like
- Purpose-built for manufactured home horizontal-discharge ductwork, minimizing install complexity for qualified technicians
- Priced roughly 15 to 25 percent below comparable Carrier, Trane, and Lennox package units at similar capacity
- R-454B refrigerant positions the unit for the current supply chain rather than the phased-out R-410A
- 5-ton capacity covers larger manufactured homes that smaller 3- and 4-ton units cannot adequately serve
- All-in-one package design reduces the number of refrigerant line connections compared to a split system, limiting one source of potential leaks
Trade-offs
- 13.4 SEER2 is the regulatory floor, not a strong efficiency performer, which means higher monthly operating costs compared to mid- or high-efficiency alternatives
- Dual-run capacitor failures are the most commonly reported repair on Goodman-built equipment, typically appearing after several years of use
- Compressor lifespan averages 10 to 14 years on Goodman platforms, noticeably shorter than the 15 to 20 years associated with premium brands
- Cooling-only configuration means a separate heating solution is still required, adding cost and complexity for homeowners who need year-round comfort
What homeowners and pros say about Goodman
Owners and technicians evaluating Goodman-built equipment like this Revolv unit encounter a consistent split in feedback. On Google dealer review aggregates, Goodman scores around 3.8 out of 5, where affordability and straightforward installation are the most frequently praised qualities. On ConsumerAffairs, which skews toward owners who have had problems, the score drops to roughly 2.5 out of 5, and the recurring theme is repair bills that begin climbing after approximately year 7. That gap between the two ratings tells a useful story: buyers who get a clean installation and stay on top of annual maintenance tend to have reasonable experiences, while those who encounter a poor startup charge or who defer maintenance are more likely to face the documented failure points.
The specific failure modes that come up most consistently with Goodman-built equipment are worth knowing before you buy. Dual-run capacitors are the most commonly reported issue and are generally a low-cost fix in the 300 to 600 dollar range when caught early, but they can cascade into compressor damage if ignored. Evaporator coil leaks appear in a meaningful share of long-term owner reports. Compressor lifespan on this platform averages 10 to 14 years, which is shorter than the 15 to 20 years associated with Carrier, Trane, and Lennox equipment. A small minority of owners also report refrigerant leaks within the first year, which technicians attribute to installation or initial charge issues rather than a manufacturing defect in most cases. For a manufactured home replacement application where the budget is constrained, the Revolv P95RD-060K is a defensible choice as long as buyers go in with realistic expectations about long-term maintenance costs.
Sources: ConsumerAffairs Goodman owner reviews, AHRI Directory of Certified Product Performance, U.S. DOE appliance and equipment efficiency standards, Goodman product specification sheets.
What it costs to run
At 13.4 SEER2, cooling this 5-ton system for a typical 1200-hour cooling season at the U.S. average electricity rate of $0.17/kWh works out to roughly $913 per year in cooling, about $0 less per year than a minimum-efficiency 13.4 SEER2 unit of the same size. Your real cost depends on your climate and local rate.
Method: (60,000 BTU/hr ÷ 13.4 SEER2) × 1200 hours ÷ 1000 × $0.17/kWh. Rate source: U.S. EIA average; cooling hours: moderate-climate estimate.
How it compares
| Brand | Comparable model | SEER2 | Stage | Price position |
|---|---|---|---|---|
| Revolv (Goodman) | P95RD-060K | 13.4 | Single-stage | Value pick |
| Carrier | WeatherMaster 50XC Series | 14.0-16.0 | Single-stage | Moderately higher than Revolv |
| Trane | YCC Series | 13.4-14.0 | Single-stage | Moderately to significantly higher than Revolv |
| Lennox | LRP16HP Series | 15.0-16.0 | Single-stage | Significantly higher than Revolv |
Competitor rows are comparable single-stage units at similar efficiency; price is relative position, not a quote.
Questions about this system
Can this unit replace my existing mobile home package unit without modifying the ductwork?
In most cases, yes, provided your existing duct opening and plenum dimensions are compatible with this cabinet's discharge configuration. It is designed as a direct replacement for standard horizontal-discharge mobile home package units, but you should confirm the exact cabinet dimensions and duct connection sizing with your installer before ordering.
Does this unit include any heating capability, or do I need a separate furnace?
This is a cooling-only unit with no heating component. You will need a separate heat source, such as an electric strip heat kit, a gas furnace, or a heat pump, if you require heating in winter months.
What kind of maintenance should I expect to keep repair costs down?
Annual professional tune-ups that include checking and replacing the dual-run capacitor proactively are especially important on Goodman-built equipment, as capacitor failure is the most commonly reported repair. Keeping the coil clean and ensuring proper refrigerant charge at installation will also help avoid the evaporator coil leak issues that show up in a meaningful share of owner reviews.
Is R-454B refrigerant easy to find if the unit needs a recharge?
R-454B is now the current standard refrigerant for new residential equipment, so supply is growing steadily. Most established HVAC contractors will be stocked or able to source it, though in some rural or smaller markets it may require a bit more lead time compared to the older R-410A that has been around for decades.
Is 5 tons the right size for my manufactured home?
Five tons is on the larger end for manufactured homes and is appropriate for roughly 2,000 to 2,500 square feet depending on insulation, local climate, and sun exposure. An oversized unit will short-cycle, reducing dehumidification and stressing components, so a Manual J load calculation from a licensed contractor before purchase is strongly recommended rather than sizing by square footage alone.
Specifications
| Cooling capacity | 5 Ton |
| Efficiency | 13.4 SEER2 |
| Configuration | Horizontal |
| Refrigerant | R-454B |